GENERAL SAFETY RULES

SERVICE

n Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury.

nWhen servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.

SPECIFIC SAFETY RULES

n Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the cutting tool “live” and shock the operator.

nKnow your power tool. Read operator’s manual care- fully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.

nAlways wear safety glasses. Everyday eyeglasses have only impact-resistant lenses; they are NOT safety glasses. Following this rule will reduce the risk of serious personal injury.

nProtect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.

nProtect your hearing. Wear hearing protection during extended periods of operation. Following this rule will reduce the risk of serious personal injury.

nInspect tool cords periodically and, if damaged, have repaired at your nearest Authorized Service Center. Constantly stay aware of cord location. Following this rule will reduce the risk of electric shock or fire.

nCheck damaged parts. Before further use of the tool, a guard or other part that is damaged should

be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center. Following this rule will reduce the risk of shock, fire, or serious injury.

nMake sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. A wire gauge size (A.W.G.) of at least 14 is recommended for an extension cord 50 feet or less in length. A cord exceeding 100 feet is not recom- mended. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.

nInspect for and remove all nails from lumber before using this tool. Following this rule will reduce the risk of serious personal injury.

nSave these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also.

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

4

Page 3 Page 5
Page 4
Image 4
Ryobi D551H manual Specific Safety Rules, Service
Page 3 Page 5

D551H specifications

The Ryobi D551H is a highly regarded pneumatic nailer designed for both professionals and DIY enthusiasts. This tool stands out due to its powerful capabilities and thoughtful features, making it an essential addition to any woodworking toolkit.

One of the key features of the Ryobi D551H is its ability to drive a range of fasteners with exceptional precision. This nailer accommodates 16-gauge finishing nails, delivering the power necessary for securing trim, molding, and other intricate woodworking applications. The tool’s depth adjustment feature allows users to customize the depth of each nail, ensuring a clean and professional finish every time.

The Ryobi D551H also boasts a powerful motor that drives nails quickly and consistently. This pneumatic design is effective for high-volume jobs, reducing fatigue and time spent on the job site. Its lightweight construction enhances portability, making it easy to maneuver in tight spaces and ideal for long periods of use.

Another notable technology in the D551H is its built-in oil-free design. This eliminates the need for regular maintenance associated with oil-based nailers, allowing users to focus more on their projects rather than upkeep. Additionally, the tool features an adjustable exhaust that directs air away from the user, keeping the workspace clean and comfortable.

Safety is a priority in the design of the Ryobi D551H. The tool includes a trigger lock that prevents accidental firing, ensuring that users can work confidently and securely. Combined with a no-mar tip that protects surfaces from damage, this nailer prioritizes the safety and quality of the user experience.

Moreover, the magazine capacity of the D551H allows for numerous fasteners to be loaded at once, reducing the frequency of reloading during extended use. This feature significantly increases efficiency, particularly in demanding work environments.

The Ryobi D551H is also compatible with a variety of accessories and attachments, enhancing its versatility. Whether users are tackling a home improvement project or engaging in professional construction tasks, the D551H is engineered to meet diverse demands with ease and reliability.

In summary, the Ryobi D551H delivers a powerful, user-friendly experience with its impressive features, advanced technologies, and commitment to safety. Ideal for both seasoned professionals and those new to woodworking, this pneumatic nailer is a robust tool designed to simplify tasks and enhance productivity on any project.
Top Page Image Contents