MAINTENANCE
WARNING:
When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage.
NOTE: Some maintenance procedures may require special tools or skills. If you are unsure about these procedures take your unit to an authorized service center.
MAINTENANCE SCHEDULE
These required maintenance procedures should be performed at the frequency stated in the table. They should also be included as part of any seasonal
WARNING:
Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask.
WARNING:
To prevent serious personal injury, never do maintenance or repairs with unit running. Always do maintenance and repairs on a cool unit. Disconnect spark plug wire to make sure the unit will not start.
| FREQUENCY | MAINTENANCE REQUIRED | REFER TO: |
|
|
|
|
| Before Starting Engine | Fill fuel tank with correct oil and fuel mixture. | Page 11 |
|
|
|
|
| Every 10 Hours | Clean and | Page 16 |
|
|
|
|
| Every 50 Hours | Clean carbon build up from muffler | Page 16 |
|
|
|
|
| Every 50 Hours | Check spark plug condition and gap. | Page 17 |
|
|
|
|
Page 14
