OPERATION
SWITCH
See Figure 2.
To turn your flashlight on and off, depress switch trigger.
180° ROTATING HEAD
See Figure 2.
Your flashlight has the feature of rotating the head 180° back and forth.
BULB REPLACEMENT
See Figure 3.
When purchasing replacement bulb, request recommended part number 780175002.
TO REPLACE BULB:
■Allow bulb to cool.
■Remove battery pack from flashlight.
■Remove lens cover by turning cover in counterclockwise direction, then remove cover.
■Remove old bulb from spring.
■Position new bulb in spring.
■Replace lens cover.
■Replace battery pack.
Note: For your convenience, your flashlight has a spare bulb storage area. It is located behind the lens cover. See Figure 3.
WARNING:
Lens and bulb become hot during use:
•During or immediately after use, don't lay flashlight flat on lens surface or place lens area in contact with a plastic or fabric covered surface.
•Handle flashlight with care around any flammable surface.
•Let flashlight cool for several minutes after use before changing bulb.
•Do not use or permit use of flashlight in bed or sleeping bags. This flashlight lens can melt fabric and a burn injury could result.
SWITCH
TRIGGER
180° ROTATING HEAD
Fig. 2
BULB STORAGE
AREA
BULB
LENS COVER
Fig. 3
Page 7
