GENERAL SAFETY RULES

Tool Use and Care

■Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

■Do not force tool. Use the correct tool for your appli- cation. The correct tool will do the job better and safer at the rate for which it is designed.

■Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is danger- ous and must be repaired.

■Disconnect battery pack from tool or place the switch in the locked or off position before making any ad- justments, changing accessories, or storing the tool. Such preventive safety measures reduce risk of starting the tool accidentally.

■Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

■When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another.

Shorting the battery terminals together may cause sparks, burns, or a fire.

■Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control.

■Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

■Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may create a risk of injury when used on another tool.

Service

■Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

■When servicing a tool, use only identical replace- ment parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.

SPECIFIC SAFETY RULES

Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

Additional Rules For Safe Operation

■Know your power tool. Read operator's manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.

Important Rules for Battery Tools

■Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possible injury.

■Do not charge battery tool in a damp or wet location. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■For best results, your battery tool should be charged in a location where the temperature is more than 50°F but less than 100°F. Do not store outside or in vehicles.

■Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.

WARNING:

Batteries vent hydrogen gas and can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.

Page 3

Page 2 Page 4
Page 3
Image 3
Ryobi HP24 specifications Specific Safety Rules, Tool Use and Care
Page 2 Page 4

HP24 specifications

The Ryobi HP24 is an impressive addition to Ryobi's lineup of high-performance power tools, designed for both professionals and DIY enthusiasts. This product stands out due to its robust build quality and innovative features that enhance efficiency and ease of use.

One of the key features of the HP24 is its powerful motor, delivering exceptional performance in a compact design. The motor is engineered to provide a high power-to-weight ratio, ensuring users can complete their tasks with maximum efficiency. The tool's ergonomic design reduces user fatigue during extended use, allowing for longer work sessions without discomfort.

The HP24 is equipped with advanced brushless motor technology, which not only extends the life of the tool but also increases runtime compared to traditional brushed motors. This technology optimizes power consumption while delivering consistent torque and performance, making it suitable for various applications including drilling, screwing, and fastening.

Another notable aspect of the Ryobi HP24 is its versatile speed settings. The tool features multiple speed and torque settings, enabling users to tailor their performance to the specific material and task at hand. This flexibility ensures that whether tackling hardwood or soft materials, users have the optimal settings for the best results.

In addition to these capabilities, the HP24 also features a keyless chuck for swift bit changes, allowing users to switch between different drill bits quickly and efficiently without the need for additional tools. Moreover, its built-in LED work light illuminates dark or confined spaces, ensuring users can work with precision even in less than ideal lighting conditions.

Durability is another hallmark of the HP24. The tool is designed to withstand the rigors of regular use, making it a reliable choice for both professional contractors and weekend warriors alike. Its rugged exterior and quality materials contribute to its long lifespan, ensuring it remains a staple in any tool collection for years to come.

Overall, the Ryobi HP24 combines power, precision, and durability in a versatile and user-friendly package, making it an essential tool for anyone looking to tackle a wide array of tasks effectively. Its advanced technology, comfortable design, and thoughtful features set it apart in the competitive market of power tools.
Top Page Image Contents