Ryobi P110 manual Assembly, Operation, Unpacking, Packing List, Applications

Models: P110

1 10
Download 10 pages 45.52 Kb
Page 7
Image 7

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

nCarefully remove the charger and any accessories from the box. Make sure that all items listed in the packing list are included.

nInspect the charger carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-800-525-2579 for assistance.

PACKING LIST

Charger

Operator’s Manual

Warranty Registration Card

WARNING:

If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

WARNING:

Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.

OPERATION

WARNING:

Do not allow familiarity with tools to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could re- sult in objects being thrown into your eyes, resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not recom- mended by the manufacturer of this tool. The use of at- tachments or accessories not recommended can result in serious personal injury.

APPLICATIONS

You may use this tool for the following purposes:

nCharging compatible Ryobi 18 volt battery packs

CAUTION:

To prevent damage to the battery pack, remove the battery pack from the charger immediately if no LED comes on. Return the battery pack and charger to your nearest service center for checking or replacing. Also, if you are removing the battery pack from the charger and no LEDs are on, return both the battery pack and the charger to your nearest service center. Do not insert another battery pack into the charger. A damaged charger may damage a battery pack.

LED FUNCTIONS OF CHARGER

LED WILL BE ON TO INDICATE STATUS OF CHARGER AND BATTERY PACK:

nRed LED on = Fast charging mode.

nGreen LED on = Fully charged and in maintenance charge mode.

nGreen LED on = When battery pack is inserted into charger, indicates hot battery pack or that battery pack is out of normal temperature range.

nYellow and Green LEDs on = Deeply discharged or defective battery pack.

nNo LED on = Defective charger or battery pack.

7

Page 7
Image 7
Ryobi P110 manual Assembly, Operation, Unpacking, Packing List, Applications