SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL | NAME | EXPLANATION |
V | Volts | Voltage |
A | Amperes | Current |
Hz | Hertz | Frequency (cycles per second) |
W | Watt | Power |
hrs | Hours | Time |
| Alternating Current | Type of current |
| Direct Current | Type or a characteristic of current |
no | No Load Speed | Rotational speed, at no load |
| Class II Construction | |
.../min | Per Minute | Revolutions, strokes, surface speed, orbits etc., per minute |
| Wet Conditions Alert | Do not expose to rain or use in damp locations. |
| Safety Alert Symbol | Precautions that involve your safety. |
| Read the Operator’s Manual | To reduce the risk of injury, user must read and understand |
| operator’s manual before using this product. | |
|
| |
|
| Always wear safety goggles or safety glasses with side |
| Eye Protection | shields and, as necessary, a full face shield when operating |
|
| this product. |
| Keep Bystanders Away | Keep all bystanders at least 50 ft. away. |
| Gloves | Wear |
| the blades. | |
|
| |
| Operate With Two Hands | Hold and operate the hedge trimmer properly with both |
| hands. | |
|
| |
| Moving Parts | Keep hands away from moving parts. |
| Electric Shock | Failure to use in dry conditions and to observe safe practices |
| can result in electric shock. | |
|
| |
| Kickback | DANGER! Beware of kickback. |
| Sharp Blade | Sharp cutting blades. To prevent serious injury, do not touch |
| cutting blades. | |
|
|
