OPERATION

STARTING/STOPPING THE CAULK GUN

See Figure 5.

Before attempting to start the caulk gun, be sure the switch lock is in the unlocked position.

nTo turn the caulk gun ON, depress the switch trigger. �n To turn the caulk gun OFF, release the switch trigger.

LOCKING THE SWITCH TRIGGER

See Figure 5.

The switch trigger of the caulk gun can be locked off using the slide switch located below the switch trigger.

nTo lock the switch trigger, slide the switch lock up. This will prevent the caulk gun switch trigger from being de- pressed.

nTo unlock the switch trigger, slide the switch down. This will allow the caulk gun switch trigger to be depressed.

LOADING CAULK

See Figures 6 - 7.

nLock the switch trigger by sliding the switch lock up.

nUsing a utility knife, cut off the tip of the spout on a standard 10 oz. tube of caulk. Cut the tip at a 45˚ angle. Remove as little as possible, taking into consideration the size of the “bead” of caulk you need.

nCheck for a second inner seal at the base of the spout. If found, insert the puncture tool inside the spout to break the seal before using. If using a partially filled tube, use the puncture tool to remove any hardened material from the tip.

NOTE: An inner seal is usually found only in cardboard caulk tubes.

nWhile holding the caulk gun steady with one hand, pull the handle of the plunger rod away from the caulk gun. Continue pulling until plunger base reaches the back of the carriage frame.

nLoad the caulk tube into the carriage frame, making sure it is well seated at both ends.

ELECTRONIC OVERLOAD PROTECTION

The caulk gun is protected by an electronic overload protec- tion feature. If too much pressure is exerted on the tube, the motor will shut down. This helps to prevent damage to the tool and the caulk tube. If the motor shuts off, make sure that:

n�Nozzle tip is cut

n�Inner seal in the caulk tube is broken

n�Hardened material is removed from the nozzle

n�Caulk tube is not damaged or frozen

n�Plunger rod is free of caulk/adhesive materials

Release the trigger and wait for 3 to 5 seconds to allow the electronics to reset. If the motor again shuts off, move the variable speed selector to the middle position and press the

TO TURN OFF

LOCK

TO

TURN ON

SWITCH

TRIGGER

UNLOCK

 

SWITCH LOCK Fig.

5

SPOUT

 

PUNCTURE

CARRIAGE

 

FRAME

 

TOOL

 

 

 

 

Fig. 6

SPOUT

CAULK TUBE

PLUNGER ROD

 

 

HANDLE

3

2

1

 

 

 

PLUNGER

 

 

ROD

 

 

Fig. 7

trigger again. If the motor continues to shut off, try another tube of material or take the tool to an authorized service center.

13

Page 12 Page 14
Page 13
Image 13
Ryobi P310 manual STARTING/STOPPING the Caulk GUN, Locking the Switch Trigger, Loading Caulk
Page 12 Page 14

P310 specifications

The Ryobi P310 is a versatile and powerful cordless pneumatic brad nailer, designed for both professionals and DIY enthusiasts. This nailer is part of the Ryobi ONE+ system, allowing users to utilize the same battery across a range of Ryobi tools, enhancing convenience and efficiency on the job site.

One of the standout features of the P310 is its robust motor that delivers a consistent driving force. This ensures that the brads are securely and accurately driven into various materials, including hardwoods, softwoods, and engineered wood. The tool is capable of driving 18-gauge brads ranging from 3/8-inch to 2 inches, making it perfect for a wide array of applications such as crown molding, trim work, and furniture assembly.

The P310 is equipped with advanced technology that improves user experience and performance. The tool boasts a dry-fire lockout mechanism, which prevents the nailer from firing when no nails are loaded, helping to protect the work surface from damage. Additionally, the adjustable depth of drive control enables users to set the depth of the nail according to the material being worked on, ensuring a clean and professional finish.

Another highlight of the Ryobi P310 is its lightweight and compact design. Weighing approximately 5.8 pounds, this brad nailer is easy to maneuver, reducing fatigue during prolonged use. The rubberized grip provides comfort and additional control, allowing users to tackle projects without straining their hands.

The nailer is also designed for easy maintenance. Its tool-free jam release mechanism allows users to quickly and easily clear any jammed nails, minimizing downtime and keeping projects on track. The onboard storage for an additional battery further enhances portability, making it a suitable choice for those on-the-go.

Safety features have also been considered in the design of the P310. The trigger has a safety mechanism that prevents accidental firing, ensuring that the tool is only activated when intended.

Overall, the Ryobi P310 is a reliable and efficient brad nailer that combines power, convenience, and safety features, making it an indispensable tool for anyone looking to enhance their woodworking capabilities. Whether you're tackling a home improvement project or working in a professional setting, the P310 stands out as a top choice for precision nailing.
Top Page Image Contents