RULES FOR SAFE OPERATION
DOUBLE INSULATION
Your Ryobi power tool is double insulated. This means you are separated from the tool's electrical system by two complete sets of electrical insulation. This extra layer of insulation is intended to protect the user from electrical shock due to a break in the wiring insulation. All exposed metal parts are isolated from the internal metal motor components with protecting insulation.
IMPORTANT
Servicing of a tool with double insulation requires extreme care and knowledge of the system and should be performed only by a qualified service technician. For service we suggest you return the tool to your nearest RYOBI AUTHORIZED SERVICE CENTER for repair. When servicing use only identical Ryobi replacement parts.
WARNING: THE DOUBLE INSULATED SYSTEM IS INTENDED TO PROTECT THE USER FROM SHOCK RESULTING FROM A BREAK IN THE TOOL'S INTERNAL WIRING. OBSERVE ALL NORMAL SAFETY PRECAUTIONS RELATED TO AVOIDING ELECTRICAL SHOCK.
WARNING: DO NOT ATTEMPT TO OPERATE THIS TOOL UNTIL YOU HAVE READ THOROUGHLY AND UNDERSTAND COMPLETELY ALL INSTRUCTIONS, SAFETY RULES, ETC. CONTAINED IN THIS MANUAL. FAILURE TO COMPLY CAN RESULT IN ACCIDENTS INVOLVING FIRE, ELECTRIC SHOCK, OR SERIOUS PERSONAL INJURY. SAVE OPERATOR'S MANUAL AND REVIEW FREQUENTLY FOR CONTINUING SAFE OPERATION AND INSTRUCTING OTHERS WHO MAY USE THIS TOOL.
READ ALL INSTRUCTIONS
1. KNOW YOUR POWER TOOL - Read operator's manual carefully. Learn its applications and limitations as well as the specific potential haz- ards related to this tool.
2.GUARD AGAINST ELECTRICAL SHOCK BY PREVENTING BODY CONTACT WITH GROUNDED SURFACES. For example: Pipes, radiators, ranges, refrigerator enclosures.
3.KEEP GUARDS IN PLACE and in working order.
4.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
5.AVOID DANGEROUS ENVIRONMENT. Don't use power tool in damp or wet locations or expose to rain. Keep work area well lit.
6.KEEP CHILDREN AND VISITORS AWAY. All visitors should wear safety glasses and be kept a safe distance from work area. Do not let visitors contact tool or extension cord.
7.STORE IDLE TOOLS. When not in use, tools should be stored in a dry, high or
8.DON'T FORCE TOOL.It will do the job better and safer at the rate for which it was designed.
9.USE RIGHT TOOL. Don't force small tool or attachment to do the job of a heavy duty tool. Don't use tool for purpose not intended - for example - Don't use a circular saw for cutting tree limbs or logs.
10.WEAR PROPER APPAREL. No loose cloth- ing or jewelry to get caught in moving parts. Rubber gloves and
11.ALWAYS WEAR SAFETY GLASSES. Every- day eyeglasses have only
12.PROTECT YOUR LUNGS. Wear a face or dust mask if the sanding operation is dusty.
13.PROTECT YOUR HEARING. Wear hearing protection during extended periods of opera- tion.
14.DON'T ABUSE CORD.Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil and sharp edges.
15.SECURE WORK. Use clamps or a vise to hold work. It's safer than using your hand and it frees both hands to operate the tool.
16.DON'T OVERREACH.Keep proper footing and balance at all times. Do not use on a ladder or unstable support.
17.MAINTAIN TOOLS WITH CARE. Keep tools sharp at all times, and clean for best and safest performance. Follow instructions for lubricat- ing and changing accessories.
18.DISCONNECT TOOLS. When not in use, be- fore servicing, or when changing attachments and accessories such as sandpaper, etc., all tools should be disconnected from power sup- ply.
Page 2
