GENERAL SAFETY RULES
WARNING:
Read and understand all instructions. Failure to fol- low all instructions listed below, may result in electric shock, fire, and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Read these instructions and the instructions for the power head thoroughly before using pruner.
Know the tool. Read and understand the operator’s manual and observe the warnings and instruction labels affixed to the tool.
Do not allow children or untrained individuals to use this unit.
Wear safety glasses or goggles that are marked to comply with ANSI Z87.1 standards and hearing and head protec- tion when operating this unit.
Wear heavy long pants, boots, and gloves. Do not wear loose fitting clothing, short pants, jewelry of any kind, or go barefoot.
Secure long hair so it is above shoulder level to prevent entanglement in any moving parts.
Keep all bystanders, children, and pets at least 50 ft. away.
Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medica- tion. A moment of inattention while operating power tools may result in serious personal injury.
Do not operate in poor lighting.
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.
Keep all parts of your body away from any moving part.
Do not touch areas around the muffler or cylinder of the power head. These parts get hot from operation. Failure to heed this warning could result in possible serious personal injury.
Always stop the engine and remove the spark plug wire before making any adjustments or repairs except for carburetor adjustments.
Inspect unit before each use for loose fasteners and dam- aged or missing parts. Correct before using the pruner attachment. Failure to do so can cause serious injury.
Use only original manufacturer’s replacement parts. Failure to do so may cause poor performance, possible injury, and will void your warranty.
Do not, under any circumstance, use any attachment or accessory on this product, which was not provided with the product, or identified as appropriate for use with this product in the operator’s manual.
Avoid dangerous environments. Do not use the attach- ment in damp or wet locations. Do not use in rain.
Use the right attachment. Do not use attachment for any job except that for which it is intended.
Keep hands away from cutting area. Keep hands away from blades. Do not reach underneath work or around or over the blade while blade is rotating. Do not attempt to remove cut material when blade is moving.
Blade coasts after being turned off.
3
