ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
Carefully remove the items from the box. Make sure that all items listed in the packing list are included.
Inspect the product carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
PACKING LIST
(Completely Assembled)
Blade Sheath
Hanger Cap
Operator’s Manual
WARNING:
If any parts are damaged or missing, do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
ATTACHING THE HEDGE TRIMMER ATTACHMENT TO THE POWER HEAD
See Figure 2.
WARNING:
Never attach or adjust any attachment while power head is running. Failure to stop the engine may cause serious personal injury.
The hedge trimmer attachment connects to the power head by means of a coupler device.
Loosen the knob on the coupler of the power head shaft and remove the end cap from the attachment shaft.
Push in the button located on the hedge trimmer attachment. Align the button with the guide recess on the extension shaft coupler and slide the two shafts together. Rotate hedge trimmer attachment until button locks into the positioning hole.
Tighten the knob securely.
NOTE: If the buttons do not release completely in the positioning holes, the shafts are not locked into place. Slightly rotate from side to side until the button is locked into place.
NOTE: Use only the specified positioning hole for this attachment.
WARNING:
Be certain the knob is fully tightened before operating equipment. Check it periodically for tightness during use to avoid serious injury.
WARNING:
Do not connect to power head until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.
WARNING:
Do not remove the blade sheath until the hedge trimmer is fully assembled and ready to use. Failure to comply could result in possible serious personal injury.
POWER HEAD
SHAFT
POSITIONING
GUIDE HOLE
RECESS
BUTTON
COUPLER
KNOB
ATTACHMENT SHAFT
Fig. 2
6
