OPERATION
STARTING AND STOPPING
See Figures 21 - 23.
TO START A COLD ENGINE:
DO NOT squeeze the throttle trigger until the engine starts and runs.
nLay the trimmer on a flat, bare surface.
nPRIME - Press the primer bulb 7 times.
nSET the start lever to the START position.
nPULL the rope until the engine starts.
nAllow the engine to run for 15 seconds.
nSqueeze trigger lock and throttle trigger.
NOTE: Squeezing the throttle trigger releases the start lever to the RUN position.
TO START A WARM ENGINE: PULL the rope until the engine starts.
TO STOP THE ENGINE:
Press and hold the switch in the stop “ 
” position until the engine stops.
IGNITION
SWITCH
TRIGGER
LOCK
THROTTLE
TRIGGER
Fig. 21
IGNITION |
SWITCH |
PRIMER BULB |
TRIGGER LOCK |
THROTTLE TRIGGER
Fig. 22
START POSITION
START LEVER
RUN POSITION
START LEVER
Fig. 23
Page 18
