SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL | NAME | DESIGNATION/EXPLANATION |
V | Volts | Voltage |
A | Amperes | Current |
Hz | Hertz | Frequency (cycles per second) |
W | Watt | Power |
min | Minutes | Time |
| Alternating Current | Type of current |
| Direct Current | Type or a characteristic of current |
no | No Load Speed | Rotational speed, at no load |
| Class II Construction | |
.../min | Per Minute | Revolutions, strokes, surface speed, orbits etc., per minute |
| Wet Conditions Alert | Do not expose to rain or use in damp locations. |
| Read The Operator’s Manual | To reduce the risk of injury, user must read and understand |
| operator’s manual before using this product. | |
|
| |
| Eye Protection | Wear eye protection when operating this equipment. |
| Safety Alert | Precautions that involve your safety. |
| Gloves | Wear |
| blades. | |
|
| |
| Moving Parts | Keep hands away from moving parts. |
50' 15m | Keep Bystanders Away | Keep all bystanders at least 50 ft. away. |
| Kickback | DANGER! Beware of kickback. |
| Hot Surfaces | To reduce the risk of injury or damage, avoid contact with any |
| hot surface. | |
|
| |
| Electric Shock | Failure to use in dry conditions and to observe safe practices can |
| result in electric shock. | |
|
| |
| Sharp Blade | Sharp cutting blades. To prevent serious injury, do not touch cutting |
| blades. | |
|
|
6
