Important safty information

FOR YOUR SAFETY, READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN THIS MANUAL AND ON THE UNIT.

POWER SOURCE

To avoid any malfunctions of the unit, and to protect against electric shock, fire or personal injury, please observe the following

ξThis system has been designed to work with 120-volt AC current. Connection to a line voltage other than that may create a safety and fire hazard and may damage the system. If you are unsure of the type of power supply to your home, consult your local dealer or power company.

ξHold the plug firmly when connecting or disconnecting the power cord to the wall outlet.

ξDo not run power cords under rugs or carpets or place heavy

objects on them.

ξDamaged or deformed power cords are hazardous and should be replaced immediately by a qualified service technician.

LOCATION

ξAir vents are provided in the cabinet to prevent excessive temperatures inside the unit. Do not place this unit in closed spaces, cover it, or otherwise block the vents.

ξDo not place this unit in direct sunlight, or near heat sources.

ξKeep this unit away from strong magnetic objects.

ξDo not use the unit in a car. The operation can not be guaranteed.

ξPlace the unit in a horizontal position, and do not place

anything heavy on it.

CARE

ξDo not insert or drop anything into this unit through the air vents as this could cause serious damage, possibly resulting in fire.

ξDo not place any object containing water or other liquids on this unit. In the event that liquid should enter the cabinet, unplug this unit immediately and contact the retailer or service center immediately.

ξDo not remove the cabinet. Touching parts inside the cabinet could result in electric shock and damage to the unit.

ξDo not put any foreign objects on the disc tray.

Nonuse Periods

ξWhen the unit is not being used, turn the power off.

ξWhen left unused for a long period of time, the unit should be unplugged from the household AC outlet.

Condensation

Moisture may form on the pickup lens in the following conditions:

ξImmediately after a heater has been turned on.

ξIn a steamy or very humid room.

ξWhen the unit is suddenly moved from a cold environment to a warm one.

ξIf moisture forms inside this unit, it may not operate properly. In this case, turn on the power and wait about one hour for the moisture to evaporate.

Volume control

ξDo not turn up the volume while listening to a portion with very low level input or no audio signal. The speaker may be damaged when a peak level portion is played.

CLEANING

ξUnplug the unit before cleaning.

ξWhen the system gets dirty, wipe it with a clean, soft cloth. If necessary, wipe it with a soft cloth, slightly dampened with mild soapy water, then a fresh cloth with clean water. Wipe dry immediately with a dry cloth.

ξNever use benzene, aerosol cleaners, thinner, alcohol or any volatile cleaning agent.

ξDo not use abrasive cleaners, as they may damage the finish.

ξAvoid spaying insecticide near all components.

ξYour speakers require minimal maintenance under normal use. The cabinet may be cleaned using a damp cloth or a mild, non-abrasive cleaner. To clean the grille, first remove it from the speaker, then brush lightly with a soft brush or use a vacuum on its lowest setting. Do not attempt to clean the actual drivers.

SERVICE

ξDo not open the cabinet of any components. There are no user-serviceable components in this product. Opening the cabinets may present a shock hazard, and any modification to this product will void your guarantee.

ξDo not attempt to service the unit yourself. If water or any metal objects such as paper clips, wire or staples accidentally fall inside, disconnect the unit from the power source immediately, and

consult an authorized service center.

ξPlease refer any service to the nearest service center.

3