12

FIRST-TIME USE

 

 

 

Do not place or submerge the coffee maker in water or other liquid.

Do not force open the coffee grinder, and do not open the housing of the grinder.

Storage

When not needed, turn off appliance and disconnect the plug from the power source.

Store the grinder in a place that is not accessible to children.

Service

If the grinder malfunctions, or is defective, or damage is suspected, immediately disconnect the plug.

Do not operate a defective appliance.

Do not force open the grinder and do not open the housing of the grinder.

Repair only should be done by an authorized Saeco service facility.

The manufacturer shall not be liable for any consequential damages after non-authorized repair.

observe the Important Safety Instructions in section 3.

4.1 Packing material

The original packing was designed to protect the coffee grinder during shipment..

Save the carton and packing material in case you need to return your appliance for service.

4.2Installation safety instructions

Observe the following safety instructions:

• Place the appliance on a flat, stable surface.

• Ensure that the coffee grinder is not accessible to children.

• Do not place the grinder on a hot surface, or near a gas or electric range.

The grinder is not ready for connection to the power supply.

4.3Power supply

Electric shock can kill. Do not immerse cord, plug, or appliance in water or other

Fire prevention

In case of fire, use carbon dioxide (CO2) extinguishers only. Do not use water or powder distinguishers.

Controls and features

Coffee bean hopper

Lid, bean hopper

liquid.

Do not touch live electrical components. This can result in electric shock. Electric shock can cause serious injury or death.

Connect the appliance only to an electric power source that corresponds to the voltage indicated on the appliance data plate.

Grind adjusment ring On/off switch

Release button for ground coffee container Doser

Doser lever

Ground coffee container

Accessories

Coffee measuring scoop

4FIRST-TIME USE

Carefully unpack your grinder being certain to remove all literature and packing material.

For personal safety and the safety of others,

4.4Connection to power supply

•Before connecting to the power supply, ensure that the On/Off switch is in the “O” position.

•Connect power cord plug to the receptacle.

4.5 Filling coffee bean hopper

Warning!

Ensure that the On/Off switch (4) is in the “O” position before when filling the coffee bean hopper with coffee beans.

•Using light pressure, set coffee bean hopper into position on grinder.

•Remove lid (2).

•After ensuring that hopper is clean, fill with fresh coffee beans.

•Replace lid (2) onto hopper.