Setting Up Your Tubside Bath Seat
3. To place the bath seat onto tub, grasp 3 the Bath Seat and pull the Clamp
Handle underneath the Elbow Cushion until fully extended.
Clamp
Handle
4. With Clamp Handle fully extended, fit |
|
| |
4 | Elbow Cushion | ||
the Elbow Cushion around the tub | |||
|
| ||
edge. Let the Bath Seat slide down to |
|
| |
the tub floor. Release the Clamp |
|
| |
Handle only when the Bath Seat and |
|
| |
Elbow Cushion are fully resting on the |
|
| |
tub. |
|
|
CAUTION:
DO NOT use the Bath Seat if:
•the bottom of Red Warning Label is exposed (Figure 4a).
•the Bath Seat and Elbow Cushion are not in full contact with the surfaces of the tub.
To Swivel Bath Seat:
4a
Red
Warning
Label
TIP: Choose your desired seat position | 1 | |
before placing your child in the bath | ||
| ||
seat. |
|
1. To Swivel Seat: Lift Locking Tab on back of seat. Rotate seat away from Elbow Cushion.
NOTE: Seat will only swivel 260 degrees. Do not force seat.
2. To Lock Seat: Push down Locking Tab on back of seat.
NOTE: Be sure to always lock the seat before placing a child in the Bath Seat.
Up to Swivel Down to Lock
5
