3 Then at the Installation of programming software successfulscreen, click Next.
4 At the Registration screen, select Register and follow the on-screen instructions or select Register Later and click Next.
5 Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the 3D programming environment. If
you do not wish to see the Profile Editor at this point, just uncheck the box and click on Finishto complete the installation.
INSTALLATION FOR USERS OF WINDOWS® 98 AND MEA) Drivers Only For Typical Users
1 With your computer switched on, close down any programs that are currently running and insert the Saitek Smart Technology CD into your CD-
ROM drive.
2 When the Introduction Screen appears, click Install Softwareto continue.
3 When the Welcomescreen appears, click Next to continue. (If the CD does not run automatically, select Start from the Windows® Taskbar, then
Runand type D:\Setup.exe and click OK).
4 After reading and accepting the Disclaimer, click Nextto continue.
Note: For your controller to work, you must have a minimum of Microsoft® DirectX® 8.1 installed on your computer. The installer will automatically
recognize if this software needs to be added, and will allow you to install it directly from the Saitek Product Companion CD, if necessary.
If you are asked to install Microsoft® DirectX® 8.1, click Installand follow the on-screen instructions, and then restart your computer when prompted.
Make sure that you leave the Saitek CD in the drive when restarting. After this software has been installed, you will automatically be taken to the
installation to continue with the next step.
5 Follow the on-screen instructions and select Yes, I want to restart my computer now when prompted.
6 After the restart, at the Device Driver Installationscreen, click on Next and follow the on-screen instructions.
7 When prompted, plug your USB connector into your computer.
8 When the Controller Propertiesscreen appears, click Next to view the Test Screen.
9 Now try out all your controller buttons and controls to show that it is working properly. When you have finished, click OK.
10 At the Programming Software screen, select Typical Userand click Next.
11 At the Registrationscreen, select Register my Saitek controller online, click Nextand follow the on-screen instructions or select Register
Laterand click Next.
12 Click on Finishto complete the installation.
PS1U+ - X45 Manual SD3.qxd 30/01/2004 08:42 Page 5