¾ – Continuous shoot.
¾ – Delete all photos in the memory.
¾ – Delete the last photo.
¾ Mode – Hi means VGA mode (300k pixels resolution). Lo means QVGA
mode (100K pixels resolution).
¾ “50” or “60” – “50” or “60” to select the frequency of light used indoors. “50”
means 50Hz and “60”means 60Hz.
Camera Function Control
Power off the camera
The camera will automatically power off when the camera with working state isn’t
used in 30 seconds.
Auto-Shoot Mode
1. Press the Function button to select “ ” shown on the LCD display.
2. Press the Shutter button within 5 seconds to activate the 10 seconds timer. The
digital camera will beep once every second;
3. After 10 seconds, the camera will beep twice indicate that the photos has been
taken.
Continuous Shoot Mode
1. Press the Function button to select “ ” shown on the LCD display.
2. Press the Shutter button within 5 seconds to activate the continuous shooting
mode and do not release the Shutter Button until you want to stop shooting. The
camera will beep once for each photo taken till the Shutter button released or the
memory is full.
3. Under the continuous shooting mode, the photos are taken in QVGA mode.
4. Under the continuous mode photo shooting, the shooting may fail due to poor
lighting. If so the continuous shooting will stop.
Note: The photos taken in continuous shoot mode can be downloaded singly.
Taking 3 Photos Continuously
1. Press the Function button to select “ ” shown on the LCD display.
2. Hold down Shutter within 5 seconds and it will take 3 photos continuously.
3. Under the continuous shooting mode, the photos are taken in QVGA mode and
saved as a video format.