Note: If it is not operated within 3 seconds, LCD will return to Preview status form
Menu options.
Delete All Photos
1. Press the Function button to select the “ ” icon shown on the LCD display;
2. Press the Shutter button the photo counter will flash. Press the Shutter Button
again within 5 seconds will delete all the photos stored in the memory.
Delete Single Photo
1. Press the Function button to select the “ ” icon shown on the LCD display.
2. Press the Shutter button once within 5 seconds to delete the last photo.
Photo Resolution Selection
Note: The resolution status “Hi” or “Lo” will always show on the LCD display in small
character.
1. Press Start/Function button to select Mode character show on LCD.
2. “Hi” means VGA mode 640*480 pixels, “Lo” means QVGA mode 320*240 pixels;
3. When you select Mode function, press the shutter button once to switch between
the Hi mode or the Lo mode. The Hi mode will allow you to take 32 photos and the
Lo mode will allow you to take 117 photos.
Fluorescent Lamp Frequency Selection
1. Please keep the frequency of camera in line with that of sunlight system.
2. Generally speaking, there is 60Hz fluorescent lamp frequency used in United
States, Asia. And 50Hz used in Japan and Europe. If there is a wrong selection of
frequency, the photo or video shoot will have line bending.
Photo Storage
The photo can be taken will vary depending on the resolution. The LCD display will
always show the status of resolution and the number of photos taken unless the
Select Button be pressed. The highest storage of photos will be
32 photos --- “Hi” resolution
117 photos --- “Lo” resolution
Press the Shutter Button to take one photo and the photo taken will be displayed as
a digit on the LCD display. Each consecutive photo taken will increase the photo
number by one digit. As the following: