BLENDER ASSEMBLY INSTRUCTIONS
NOTE: Before assembling, make sure the cord is unplugged and press and release the OFF/PULSE Button.
CAUTION: Use extreme care when handling the Blade Assembly. Do not touch Blades with your fingers. The Blades are very sharp and can cause injury if touched.
1.Carefully place the Blending Jar over the Motor Housing with the Pour Spouts facing to either side as seen in Figure 1.
2.Blending Jar should then drop into the Motor Housing and lock into place.
NOTE: The Blending Jar must be firmly attached to the Motor Housing before putting any foods or liquids into the Blending Jar.
OPERATING INSTRUCTIONS
CAUTION: Keep hands and utensils out of the Blending Jar while blending to prevent the possibility of severe injury to persons or damage to the unit. A scraper may be used but must only be used when the unit is not running.
CAUTION: Use extreme care when handling the Blender Blade.
Do not touch Blades with your fingers. The Blades are very sharp and can cause injury if touched.
1.Before starting, make sure power cord is unplugged and press and release the OFF/PULSE Button.
2.Make sure that the Blending Jar is securely fastened to the Motor Housing. See Assembly Instructions for details.
CAUTION: Never place the Blade Assembly on the Motor Housing without the Blending Jar being completely assembled and securely in place.
3. Add ingredients to the Blending Jar.
NOTE: Do not fill the Blending Jar more than 3/4 full
4.Place Blending Jar Lid with Cap on Blending Jar. Remember: Always hold Lid in place during processing.
NOTE: When placing Blending Jar Lid with Cap onto the Blending Jar make certain that the longer inner lips of the Blending Jar Lid with Cap are aligned with the two Pour Spouts to insure no leakage occurs while blending.
5.Plug the power cord into a 120V AC electrical outlet. Press the ON Button. Blend until ingredients have reached desired consistency.
4
