OPERATING INSTRUCTIONS

1To open, hold the unit vertically, gripping the cover in one hand, and the grinder in the other.

2Turn the cover to move the pointer from to .

3 Gently lift the cover off.

INSTALL BATTERIES FOR OPERATION

1 Fit 4 AA Alkaline batteries into the motor unit.

2 The polarities (+ and -) are marked on the battery compartment.

FILL THE GRINDER

1 Lift the motor unit off the grinder.

2Fill the grinder with peppercorns, sea salt, dried herbs or spices.

3 Don't overfill, or it won't fit together.

4 Align the pointers on the bottom of the motor unit with

the padlocks on the top of the grinder, and lower the motor unit on to the grinder.

5 The spindle should slide easily into the centre of the motor unit.

6 Lower the cover on to the motor unit.

7 Align the pointer on the cover with the open padlock , push the cover down, then turn it to align the pointer with the closed padlock .

ADJUST THE GRINDER

1Turn the whole mill upside down, and turn the knob right (-) until it won't go any further.

2 Now turn it left (+) a little.

3Turn the mill right way up, and press and release the switch.

4 Check the grind size, and adjust till it's the way you want it.

5Don't turn it more than 6 complete turns towards +, or you may unscrew the knob from the spindle.

6 Set the base down and sit the mill on the base.

GETTING TO KNOW YOUR

SALTON AUTOMATIC

SALT/PEPPER MILL

Your product may vary slightly from illustration.

Cover P/N 71203

Motor Unit P/N 71204

Grinder P/N 71205

Base P/N 71206

2