10
Scurve 215 System Configurations
Using Two S curve 215’s for Mains and Monitors
In this example, two S curve 215’s are used for the stereo main and for the 2-channel monitor mix. The mixer’s left and right outputs are connected to the first S curve 215’s Channel 1
and Channel 2 inputs for the main PA speakers. Then, the first S curves 215’s Channel 1 and Channel 2 outputs are connected to the inputs of the power amplifier for the main speakers.
For the monitor mix, the mixer’s AUX1 and AUX2 outputs are connected to the second S curve 215’s Channel 1 and Channel 2 inputs. Then, the second S curves 215’s Channel 1 and
Channel 2 outputs are connected to the inputs of the 2-channel power amp. Finally, the power amplifiers outputs are connected to the passive (non-powered) monitor loudspeakers.