Samson 300 specifications General Description, Features, Servo, Amplifiers, Power Amplifier

PRO

AMPLIFIERS PRODUCT SPECIFICATION SHEET

TYPE:

POWER

AMPLIFIERS

PRODUCT

SERVO 300

SERIES

SERVO

DESCRIPTION

POWER AMPLIFIER

CATEGORY

AMPLIFIERS

GENERAL DESCRIPTION

The Samson Servo 300 stereo power amplifier has been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by the most professional audio engineers and installers.

Their convenient 2 rack-space design is compact, and yet there’s plenty of power available, with 2 x

100 Watts at 8Ω, 2 x 150 Watts at 4Ω over the full frequency spectrum, from 10 Hz to 55 kHz.

For mono applications, a Bridge mode links both channels of the amplifiers, thus providing even more single channel power, with a power ratings of 300 watts into an 8 Ohm load.

Input connections are available for both unbalanced RCA connections and balanced 1/4-inch TRS connections. For the outputs, the Servo 300 amplifier provides standard 5-way binding posts and 1/4˝ phone jacks. Front-panel controls and displays include a power switch with LED indicator, as well as independent left and right channel input level controls. To help you set the correct operating levels, the Servo 300 amplifier includes front panel Signal, Peak and Protection LED indicators. There's also a ten-segment VU meter to help you set a good operating level.

Like all serious power amplifiers, the Servo 300’s internal electronics are based around a serious power- core, with a over-sized toroidal transformer and large extruded heat sinks. To keep the Servo 300 amplifier

running cool, the design employs twin internal wind tunnels with forced-air cooling via two temperature-sensitive, variable speed fans, which greatly reduce the chance of thermal and overheating problems. Multi-stage protection for power-up, over-heating, over-current, short circuit, low output impedance and DC voltage, assures high reliability under the most demanding situations.

The Servo 300 amp is road tough with its all steel chassis and 19-inch rack mount design. The Servo 300 amplifier is ready for a life on the road, or to make its home in a fixed installation.

Optimized for live sound venues, houses of worship, commercial installations, and for driving small and medium-sized live PA systems, the Servo Series amplifiers will deliver reliable power from gig-to-gig, venue-to-venue and day-to-night.

FEATURES

>Power to spare - 2 x 100 Watts at 8Ω, 2 x 150 Watts at 4Ω

>For mono applications, a Bridge mode links both channels of the amplifiers, thus providing even more power, with a power rating of 300 watts driving an 8 Ohm load.

>Clean, crisp sound - Impressive audio specifications such as 0.04% THD, dynamic range of 105 dB, crosstalk

of 80 dB, and frequency response of 10 Hz to 55 kHz guarantee ultra-clean sound quality.

>Independent input level controls for each channel allow precision adjustments.

continues»

FRONT PANEL

BACK PANEL

©2006 Samson v1.0 5/06