4
ChangingtheCapsule
1. Turn down the level control of the device the CS Series Microphone is connected and disconnect the XLR
cable from the microphone.
2. Unscrew the installed capsule, removing the entire grill and element from the base.
3. Screw in the desired CS capsule, making sure the threads are aligned before tightening.
4. Ensure the capsule is completely secured to the base before using, as any vibration may loosen the capsule,
add handling noise, and result in signal loss.
5. Reconnect the XLR cable and slowly raise the volume of the microphone until the desired level is reached.
CaringforyourCSMicrophone
Your CS Series Microphone’s rugged design and gold-plated connectors are made to withstand years of extreme
usage, but to ensure your microphone and capsule will not become damaged, always store the microphone and
additional capsule in the provided protective case.
To clean your microphone, wipe it down with a damp cloth or remove the grill and rinse with plain water. If
needed, use a mild cleaner (such as dishwashing liquid soap) to remove any odors or stains. Never use abrasive
cleaners as they may damage the microphone’s nish. Should the XLR, or gold capsule ring connectors ever
become oxidized, use a deoxidizing solution. Make sure the connectors are completely dry before axing the
capsule or connecting an XLR cable.