Samson D2500 - page 28

26

System Configurations

Using Two D2500’s for Mains and Monitors

In this example, two D2500’s are used for the stereo main and for the 2-channel monitor mix. The mixer’s left and right outputs are connected to the first D2500’s inputs for the main

PA speakers. Then, the outputs are connected to the inputs of the power amplifier connected to passive loudspeakers. For the monitor mix, the mixer’s AUX1 output is connected to the

second D2500’s channel 1 input and AUX2 output is connected to the channel 2 input. Then, the second D2500’s channel outputs are connected to the inputs of the 2-channel power

amp. Finally, the power amplifiers outputs are connected to the passive (non-powered) monitor loudspeakers.

Contents

Main Safety Instructions/Consignes de scurit/Sicherheitsvorkehrungen/Instrucciones de seguridad Copyright 2004 - 2005. Samson Technologies Corp. Printed September, 2005 v1.2 Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 www.samsontech.com Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888 Table of Contents Introduction D2500 Features Page Controls and Functions Page D2500 Quick Start Navigating the D2500 Controls Page Page Page . You should know this! Page Setting up and Using the High Pass and Low Pass Filters Using the Internal LIMITER for Basic Speaker Protection Using the A/B Feature Storing Programs in the D2500 MIDI and D Net Page Operating the D2500 with the D1500 RTA Operating the D2500 with the D1500 RTA Page Operating the D2500 with the D1500 RTA Page System Configurations Page D2500 Wiring Guide Balanced - XLR to XLR Cable XLR Insert Cable Specifications