7
8. Adjust the BASS and Treble equalizer controls to taste.
(When you get a great setting that complement your
instrument and playing style, it’s a good idea to write it
down for future use.)
9. Now, press the CHANNEL SWITCH (or the footswitch) to
select CHANNEL 2.
10. Set the CHANNEL 2 CRUNCH to “10” position (fully
clockwise) and then, while playing, slowly turn the G
Series CHANNEL 2 VOLUME control up until the desired
level is achieved.
NOTE: With the CRUNCH control on “10” you will get the
most overdrive from CHANNEL 2. You can turn down the
RUNCH control for less distortion.
11. Adjust the BASS, MID (G30R only) and TREBLE equal-
izer controls to taste. (When you get a great setting that
complement your instrument and playing style, it’s a
good idea to write it down for future use.)
7
Setting Up and Using Your Hartke G Series Guitar Amplifier12. Your G Series amplifier features a CD input which you
can use with a portable CD player, cassette, mini disk or
MP3 player to jam with pre-recorded tracks or learn a riff
from a favorite tune. In fact, you can plug any line level sig-
nal into the CD input including the signal from a keyboard
or drum machine. Connect the CD player or other Line level
device to the CD Input using stereo 1/4-inch to RCA cable.
You will want to use the volume control on the CD player or
other Line level device to set the balance between the track
and your guitar. So, start with the volume control all the
way down and slowly raise it until you reach a good balance
with your guitar.
13. Test the headphone output by turning the Volume
control to its minimum (fully counterclockwise) position
and then connect a standard stereo headphone to the front
panel Phones jack. While playing your guitar, slowly turn
the Volume control up—you should hear sound from the
headphones and none from the connected speaker.
#(