ARCHITECT’S & ENGINEER’S
SPECIFICATION
The microphone shall be of a dynamic type
with hypercardioid polar pattern. The micro-
phone shall provide its output on a gold-plated
male XLR-type connector. Output impedance
shall be 150 ohms.
The microphone shall be constructed of a
zinc casing and shall contain a triple-plated
multi-stage windscreen and noise filter for the
removal of pops, sibilance and onstage noise, an
aluminum humbucking voice coil for the elimi-
nation of magnetic field interference and true
hum rejection, a Neoprene transformer cover
for the reduction of microphonics, a high-out-
put Neodymium element, and a multi-axis
shock-mount to minimize handling noise. The
microphone shall have frequency response
from 20 Hz to 18.5 kHz, sensitivity of -47 dBV at
94 dB SPL, and a maximum SPL of 137 dB.
Dimensions shall be 2.25″(57 mm) head length,
4.5″(114.2 mm) main unit length and 6.75″
(172 mm) total length. Weight shall be 8.7 oz.
(250 g). The microphone shall carry a three-
year warranty.
The microphone shall be a SAMSON Q
MIC
.
QMIC SPECIFICATIONS
Type: Dynamic
Polar pattern: Hypercardioid
Frequency response: 20 Hz - 18.5 kHz
Sensitivity: -47 dBV @ 94 dB SPL
Max.SPL: 137 dB
Output impedance (@ 1 kHz): 150 Ω
Connector: 3-pin gold-plated balanced XLR male
Dimensions
Head length: 2.25″• 57 mm
Main unit length: 4.5″• 114.2 mm
Total length: 6.75″• 172 mm
Weight: 8.7 oz. / 250 g
Specifications subject to change without notice. © 1998 SAMSON
1.0
0.8
0.6
0.4
0.2
0
20000100005000
2000
1000
5002001005020
-40
-30
-20
-10
0
10
-20
-15
-10
-5
0
5
A • B Span range : ___
BWriting Speed : ____sec.0.5
Ref. 0dB Level : ___dB
0 Paper Speed :____mm/sec.
10 LINEAR
S / N
FREQUENCY Hz
QMIC
Measuring Obj.;
Date:
dB V
SAMSON
(Hz)
1/2/96
300Hz
1000Hz
3000Hz
Scale is 5 decibels per division
0°
30°
60°
90°
120°
150°
180°
210°
240°
270°
300°
330°