Samson MDR series Architect’S & Engineer’S Specifications, MDR 8 SPECIFICATIONS, Mixers

PRODUCT SPECIFICATION SHEET

SERIES	DESCRIPTION	CATEGORY
MDR	MIXER	MIXERS

MDR 8

FEATURES (continued)

>Quality built and rugged construction ensure reliable performance from venue to venue and session to session.

>Three-year extended warranty.

292mm

89mm

292mm

292mm

ARCHITECT’S & ENGINEER’S SPECIFICATIONS

The Samson MDR8 shall be an 8 input, stereo output mixer. It shall have 4 mic channels with trim controls, HF, MF, and LF equalizer controls, 2 aux sends, pan control and a 60mm fader. It shall have 2 mic/line stereo channels with all the same controls as the mic channels except for the trim control. 60mm left and right output faders will be available. Each channel shall have a REC button which when pushed along with the Hard Disk button in the master section allows that channel’s output to be sent through the 2TK output and to a computer for recording without getting a loop. A mono output with level control shall be provided. A control room and headphone output and level control shall also be provided. 24 bit DSP effects shall also be provided with 8 presets. The MDR8 uses an external power supply.

MDR 8 SPECIFICATIONS

Frequency Response (Trim @ Min, unity gain +0/-1 dB)

Mic to Main	10 Hz - 30 kHz
Line to Main	10 Hz - 30 kHz
Aux Return to Main	10 Hz - 30 kHz
Line to Aux Send	10 Hz - 32 kHz

T.H.D. (Trim @ Min, +4dBu output, unity gain, 1 kHz w/30 kHz LPF) Mic/Line to Main (Mono Ch). 0.02%

Line to Main (Stereo Ch)	0.02%
Line to Aux Send	0.02%
Equivalent Input Noise ("A" filter on, input shorted)
Mic	-128 dB
Line	-102 dB
Maximum Voltage Gain
Mic to Main	74 dB
Line to Main (Mono Ch)	56 dB
Line/Tape to Main (Stereo Ch) ..	20 dB
Aux Return to Main	20 dB
Mic to Aux Send	74 dB
Line to Aux Send (Stereo Ch) ...	34 dB
Residual Noise (30 kHz LPF, all control Min)
Main	-89 dBu
Aux Send	-86 dBu
Crosstalk (@ 1 kHz w/ 30 kHz LPF)
Ch vs. Ch	-75 dB
Input vs. Output	-84 dB
Peak LED Sensitivity
(before clipping)	5 dB
CLIP Indicators	Turn on: THD> 0.1%
Headphone output (600 ohm load)	100 mW
Maximum Input Level (1 kHz, Ch. & Mix fader set to zero)
Mic Input (Mono Ch)	+ 11 dBu
Line Input (Stereo Ch)	+ 27 dBu
Input Channel Equalizer (± 2dB)
High (shelving)	12 kHz ±15 dB
Mid (peaking)	2.5 kHz ± 15 dB
Low (shelving)	80 Hz ±15 dB
Meters	6 POINT LED METERS (-20,
	-12, -6, 0, +6dB and PEAK)
Internal DSP Effects	24 bit, - 8 Presets: 1 - Large
	Hall; 2 - Medium Hall; 3- Large
	Room; 4 - Vocal Room; 5-Vocal
	Room 2; 6 - Chorus + Reverb;
	7- Chorus + Delay; 8 - Stairwell
Phantom Power	+48V
Power Requirement	110V-240V, 50/60Hz
Power Consumption	24W
Dimensions (W x D x H)	11 1/2" x 11 1/2" x 3 1/2"
	292mm x 292mm x 89mm
Weight	6.3 lbs. (2.9 Kg)