Power Ampliﬁers

Servo 120

Rated Output Power (1KHz):

Frequency Response (-3 dB): Crosstalk (adj. channels): Distortion THD:

Distortion at rated power:

Input Sensitivity (level control at maximum): Headphone Output Level:

Power Consumption:

Dimensions:

Weight:

Servo 170

Rated Output Power (1 kHz):

Frequency Response (-3dB): Crosstalk (adj. channels): Distortion THD:

Input Sensitivity (level control at maximum): Power Consumption:

Dimensions:

Weight:

Servo 260

Rated Output Power (1 kHz):

Frequency Response (-3 dB): Crosstalk (adj. channels): Distortion THD:

Input Sensitivity (level control at maximum): Power Consumption:

Dimensions:

Weight:

Servo 550

Rated Output Power (1 kHz):

Frequency Response (-3 dB): Crosstalk (adj. channels): Distortion THD:

Input Sensitivity (level control at maximum): Power Consumption:

Dimensions:

Weight:

S500

Rated Output Power, per channel

Channel Separation (4 ohm, 125 W, 1 kHz) Frequency Response (0 dB, +0, -.5 dB) Distortion THD

Dynamic Range

Voltage Gain (4 ohm, 1 kHz) DC Offset Voltage Damping Factor Dimensions

Weight:

S700

Rated Output Power (1 kHz):

Frequency Response (-3 dB):

Channel Separation:

Distortion THD:

Dynamic Range:

Voltage Gain (4 ohm, 1 kHz):

DC Offset Voltage

Damping Factor

Dimensions:

Weight:

S1000

Rated Output Power (1 kHz):

60 W into 4 Ω per channel

52 W into 8 Ω per channel

120 W into 8 Ω bridged

<10 Hz to 100 kHz

80 dB 1 kHz @ rated output

<.05% < .05% +4 dBu

240 mW at 8 Ω (1 kHz)

240 W @ 120 V/60 Hz

270 W @ 220 V/50 Hz 1.75″ (h) x 17.5″ (w) x 11.5″ (d)

44 mm (h) x 444 mm (w) x 292 mm (d) 15.6 lb • 7 kg

85 W into 4 Ω per channel

60 W into 8 Ω per channel <20 Hz to 50 kHz 85 dB 1kHz @ rated output <.01% 0 dBm

330 W (115 Vac)

330 W (230/240 Vac)

3.5″ (h) x 19″ (w) x 9.5″ (d) 88 mm (h) x 482 mm (w) x 240 mm (d)

13.7 lbs. • 6.2 kg

130 W into 4 Ω per channel

90 W into 8 Ω per channel

20 Hz to 50 kHz

85 dB 1 kHz @ rated output <.03% 0 dBm

490 W (115 Vac)

490 W (230/240 Vac)

3.5″ (h) x 19″ (w) x 9.5″ (d) 88 mm (h) x 482 mm (w) x 240 mm (d)

17.6 lbs. • 8 kg

275 W into 4 Ω per channel

235 W into 8 Ω per channel

550 W into 8 Ω bridged < 10 Hz to 85 kHz -74 dB, 1 kHz @ rated output <.06% +4 dBu

360 W (120 Vac)

395 W (220 Vac) 5.2″ (h) x 19″ (w) x 9.2″ (d)

132mm (h) x 482mm (w) x 234mm (d) 32.4 lb • 14.7 kg

250 W into 4 Ω per channel

150W into 8 Ω per channel

500 W into 8 Ω bridged

80 dB

10 Hz - 20 kHz

0.04%

105 dB

33.5 dB

0 ± 100 mV More than 200

5.25(h) x 19 in (w) x 9.75 (d) 133 (h) x 482 mm (w) x 247 (d)

25.7lb • 11.66 kg

360 W into 4 Ω per channel

230 W into 8 Ω per channel

720 W into 8 Ω bridged

10 Hz to 20 kHz

80 dB, (4 ohm, 125 W, 1 kHz) < .04% 105 dB 33.5 dB 0 ± 100 mV

More than 200 3.5″ (h) x 19″ (w) x 16.75″ (d)

88 mm (h) x 482 mm (w) x 425 mm (d) 31 lb • 14.06 kg

545 W into 4 Ω per channel

Frequency Response (-3 dB): Channel Separation: Distortion THD:

Dynamic Range:

Voltage Gain (4 ohm, 1 kHz): DC Offset Voltage Damping Factor Dimensions:

Weight:

S1500

Rated Output Power (1 kHz):

Frequency Response (-3 dB): Channel Separation: Distortion THD:

Dynamic Range:

Voltage Gain (4 ohm, 1 kHz): DC Offset Voltage Damping Factor Dimensions:

Weight:

S2000

Rated Output Power (1 kHz):

Frequency Response (-3 dB): Channel Separation: Distortion THD:

Dynamic Range:

Voltage Gain (4 ohm, 1 kHz): DC Offset Voltage Damping Factor Dimensions:

Weight:

F800

Rated Output Power (1 kHz):

Frequency Response (+0dB, -1dB): Channel Separation:

Distortion THD:

Dynamic Range:

Voltage Gain (4 ohm, 1 kHz): DC Offset Voltage Damping Factor Dimensions:

Weight:

F1200

Rated Output Power (1 kHz):

Frequency Response (+0dB, -1dB): Channel Separation:

Distortion THD:

Dynamic Range:

Voltage Gain (4 ohm, 1 kHz): DC Offset Voltage Damping Factor Dimensions:

Weight:

Equalizers

S•Curve 215

Center frequencies (Hz)

Variable range

Frequency response (unity) Distortopn THD

High pass ﬁlter

Noise (with 20 kHz LPF, all faders ﬂat) Level Meter

Dimensions

Weight

S•Curve 131

Center frequencies (Hz)

340 W into 8 Ω per channel

1090 W into 8 Ω bridged

10 Hz to 20 kHz

80 dB, (4 ohm, 125 W, 1 kHz) < .04% 103 dB 35.2 dB 0 ± 100 mV

More than 200 3.5″ (h) x 19″ (w) x 16.75″ (d)

88 mm (h) x 482 mm (w) x 425 mm (d) 36 lb • 16.33 kg

780 W into 4 Ω per channel

550 W into 8 Ω per channel

1550 W into 8 Ω bridged

9 Hz to 42 kHz

82 dB, (4 ohm, 125 W, 1 kHz) < .021% 101 dB 37.3 dB 0 ± 200 mV

More than 200 5.25″ (h) x 19″ (w) x 16.75″ (d)

133 mm (h) x 482 mm (w) x 425 mm (d) 31 lb • 14.06 kg

1020 W into 4 Ω per channel

685 W into 8 Ω per channel

2025 W into 8 Ω bridged

10 Hz to 50 kHz

85 dB, (4 ohm, 125 W, 1 kHz) < .016% 98 dB 38.25 dB

0 ± 100 mV More than 200 5.25″ (h) x 19″ (w) x 16.75″ (d)

133 mm (h) x 482 mm (w) x 425 mm (d) 36 lb • 16.33 kg

425 W into 4 Ω per channel

260 W into 8 Ω per channel

830 W into 8 Ω bridged

10 Hz to 60 kHz

80 dB, (4 ohm, 125 W, 1 kHz) < .04% 105 dB 33.5 dB 0 ± 100 mV

More than 100 5.25″ (h) x 19″ (w) x 11.5″ (d)

133 mm (h) x 482 mm (w) x 292 mm (d) 30.5 lb • 13.8 kg

840 W into 4 Ω per channel

430 W into 8 Ω per channel

1244 W into 8 Ω bridged

10 Hz to 60 kHz

80 dB, (4 ohm, 125 W, 1 kHz) < .04% 103 dB 35.2 dB 0 ± 100 mV

More than 100 5.25″ (h) x 19″ (w) x 11.5″ (d)

133 mm (h) x 482 mm (w) x 292 mm (d) 40.5 lb • 18.4 kg

Dual 15-band graphic EQ 25, 40, 63, 100, 160, 250, 400, 630, 1 k, 1.6 k, 2.5 k, 4 k, 6.3 k, 10 k, 16 k ±6 dB, ±12 dB, -12 dB, -24 dB <10 Hz to 90 kHz Less than 0.01%

80 Hz (18 dB/ oct) -85 dB 6-segment LED

1.75″ (h) x 19″ (w) x 10.75″ (d) 44 mm (h) x 482 mm (w) x 273 mm (d)

5.7 lb. • 2.6 kg

31-band graphic EQ 20, 25, 31.5, 40, 50, 63, 80, 100, 125,

Variable range

Frequency response (unity) Distortion THD

Low Cut Switch and Frequency knob Noise (with 20 kHz LPF, all faders ﬂat) Level Meter

Dimensions

Weight

S•Curve 231

Center frequencies (Hz)

Variable range

Frequency response (unity) Distortion THD

High Cut Switch and Frequency knob Low Cut/Sub Frequency Crossover Sub Controls

Noise (with 20 kHz LPF, all faders ﬂat) Level Meter

Dimensions

Weight

Processors

S•com

Frequency Response

Dynamic range

THD

Crosstalk

Operating Level

Max. Input Level

CMRR

Max. Output Level

Dimensions

Net Weight

Shipping Weight

S•Com Plus

Frequency Response

Dynamic range

THD

Crosstalk

Operating Level

Max. Input Level

CMRR

Max. Output Level

Dimensions

Net Weight

Shipping Weight

S•com 4

Frequency Response

Dynamic range

THD

Crosstalk

Operating Level

Max. Output Level

Max. Input Level

CMRR

Dimensions

160, 200, 250, 315, 400, 500, 630, 800, 1 k, 1.25 k, 1.6 k, 2 k, 2.5 k, 3.15 k, 4 k, 5 k, 6.3 k, 8 k, 10 k, 12.5 k, 16 k, 20 k ±6 dB, ±12 dB, -12 dB, -24 dB <10 Hz to 90 kHz Less than 0.01%

18 dB/ oct swept @ 15Hz to 400 Hz -85 dB 8-segment LED

1.75″ (h) x 19″ (w) x 10.75″ (d) 44 mm (h) x 482 mm (w) x 273 mm (d)

5.7 lb. • 2.6 kg

Dual 31-band graphic EQ 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1 k, 1.25 k, 1.6 k, 2 k, 2.5 k, 3.15 k, 4 k, 5 k, 6.3 k, 8 k, 10 k, 12.5 k, 16 k, 20 k ±6 dB, ±12 dB, -12 dB, -24 dB <10 Hz to 90 kHz Less than 0.01%

18 dB/ oct swept @ 5kHz to 25kHz Variable Internal 2-way Gain, Frequency, Sub Mono Switch -85 dB 8-segment LED

3.5″ (h) x 19″ (w) x 10.375″ (d)

88.9mm (h) x 482 mm (w) x 263 mm (d)

5.7lb. • 2.6 kg

Stereo Compressor <10Hz to 20kHz +0 / -0.1dB effect out, -0.4dB @ 100kHz, <10Hz to 20kHz +0 / -0.1dB effect in, -3dB @ >100kHz

116dBu, un-weighted, 22Hz to 22kHz 0.008 % typ. @ +4 dBu, 1kHz effect out, 0.016% effect in >95dB, 22Hz to 22kHz

Selectable +4dBu / -10dBV +21dBu, balanced Min 40dB, >50dB @ 1kHz +21dBu Balanced

1 3/4″ (44.5mm) x 19″ (482.6mm) x 7 3/4″ (197mm)

4.8 lb (2.2kg)

7.5 lb (3.4kgs)

Stereo Compressor/Limiter <10Hz to 20kHz +0 / -0.1dB effect out, -0.4dB @ 100kHz, <10Hz to 20kHz +0 / -0.1dB effect in, -3dB @ >100kHz

116dB, un-weighted, 22Hz to 22kHz 0.008 % typ. @ +4dBu, 1kHz effect out, 0.016% effect in >100dB, 22Hz to 22kHz

Selectable +4dBu / -10dBV +21dBu, balanced Min. 40dB, >50dB @ 1kHz +21dBu, balanced

1 3/4″ (44.5mm) x 19″ (482.6mm) x 7 3/4″ (197mm)

5 lb (2.3kg)

7.5 lb (3.4kg)

4 Channel Compressor/Gate <10Hz to 20kHz +0 / -0.1dB effect out, -0.4dB @ 100kHz, <10Hz to 20kHz +0 / -0.1dB effect in, -2dB @ >100kHz

100dBu, un-weighted, 22Hz to 22kHz 0.0008 % typ. @ +4dBu, 1kHz effect out, 0.014% effect in 95dB, 22Hz to 22kHz

Selectable +4dBu / -10dBV +21dBu, balanced +21dBu, balanced Min 40dB, >50dB @ 1kHz

1 3/4″ (44.5mm) x 19″ (482.6mm) x 7 3/4″ (216mm)

Net Weight	5.25 lb (2.4kg)
Shipping Weight	7.5 lb (3.4kg)
S•3-Way	Stereo/Mono Crossover
Inputs	Female Balanced XLR
Max. Input level	+26dBu balanced
Outputs	Male Balanced XLR
Max. Output Level	+26dBu
Frequency Response	<10Hz to >90kHz, +0 / -3dB
Signal to Noise	(Ref +4dBu), 22Hz to 22kHz, unweighted
	90dB high out, mid 90dB, low 94dB,
	all outs >100dB muted.
CMRR	Min. 50dB, >55dB @ 1 kHz
Crossover Type	Linkwitz-Riley, 24dB / Octave
Crossover 1 Channel 1	35Hz to 800Hz
	350Hz to 8kHz / with 10X multiplier
	18Hz to 400Hz / 4 Way Low Mode
Crossover 1 Channel 2	35Hz to 800Hz
	350Hz to 8kHz / with 10X multiplier
Crossover 2 Channel 1	350Hz to 8kHz
	175Hz to 4kHz / 4 Way Low Mode
Crossover 2 Channel 2	350Hz to 8kHz
	700Hz to 8kHz / 4 Way Low Mode
High Pass Filter	-3dB @ 15Hz 3 pole, 18dB / Octave
Dimensions	1.3/4″ (44.5 mm) x 19″ (482.6 mm)
	x 8.1/2″ (217 mm)
Net Weight	6.6 lb (3kg)
Shipping Weight	9.4 lb (4.3kg)
S•phone	4 Channel Headphone Mixer/Amp
Input	2 TRS Balanced 1/4″ (Left-Right) or (Left mono)
Max. input level	+26dBu balanced
CMRR:	Min 40dB, >55dB @ 1 kHz
Frequency response	10Hz to 32kHz, +0 / -3dB
Noise	> 90dB, unweighted, 22Hz to 22kHz
THD	0.008 % typ. @ +4dBu, 1kHz
Max. output level	140mW at 32ohms, 385mW at 66ohms.
Impedance minimum	8Ohms
Dimension	1 3/4″ (44.5mm) x 19″ (482.6mm)
	x 8 1/2″ (217mm)
Net Weight	5.5 lb (2.5kg)
Shipping Weight	8 lb (3.8kg)
S•gate 4	4 Channel Gate/Ducker
Input	XLR and 1/4" TRS jack
Impedance	20k Ohm balanced, 10k Ohm unbalanced
Max. Input Level	+21 dBu, balanced and unbalanced
Output	XLR and 1/4" jack
Max. Output Level	+21 dBu, balanced and unbalanced
Fuse	100-120 V AC; 250 mA (slow-blow)
	200-240 V AC: 125 mA (slow-blow)
Power Consumption	5 Watts
Power inlet	Standard IEC receptacle/with fuse
Dimensions	1 3/4" (h) x 19" (w) x 7 3/4"
	44.5 mm (h) x 482.6 mm (d) x 196.9 mm (d)
Net Weight	5.25 lbs.• 2.4 kgs
Shipping Weight	7.5 lbs.• 3.4 kgs
S•vox	Stereo Voice Channel/Input Mixer
Speciﬁcations TBD
C•Valve	Tube Preamp
Speciﬁcations TBD
C•Com 16	Compressor
Speciﬁcations TBD
C•Com Opti	Optical Compressor
Speciﬁcations TBD
C•Control	Studio Matrix
Speciﬁcations TBD
C•Cue 8	Headphone Amp
Frequency Response	<10Hz to 20kHz
Dynamic range	116dBu, un-weighted, 22 Hz to 22 kHz
THD	0.008 %
Crosstalk	>95dB, 22 Hz to 22 kHz
Operating Level	Selectable +4dBu / -10 dBV
Max. Input Level	+21dBu, balanced
CMRR	Min 40dB, >50dB @ 1kHz
Max. Output Level	+21dBu Balanced
INPUT	XLR and 1/4" TRS jack

Power Amplifiers specifications

Samson Power Amplifiers have been a staple in audio performance for decades, renowned for their reliability, quality, and versatility. Catering to an array of applications from live sound to studio settings, Samson amplifiers offer a blend of advanced technology and user-friendly design, making them a preferred choice for audio professionals.

One of the standout features of Samson Power Amplifiers is their robust construction. Designed for durability, these amplifiers are typically housed in rugged steel chassis, ensuring they withstand the rigors of transport and stage use. The cooling systems integrated into the amplifiers prevent overheating during prolonged use, a critical attribute for live performances where reliability is non-negotiable.

Samson amplifiers utilize state-of-the-art Class D technology, known for its efficiency and lightweight design. Unlike traditional Class AB amplifiers, Class D options deliver high power output with minimal energy loss, allowing for greater emphasis on sound fidelity. This technology not only enhances performance but also results in lower operating costs and reduced heat output, contributing to their longevity.

Another key characteristic of Samson Power Amplifiers is the inclusion of advanced protection circuitry. This feature guards against short circuits, thermal overload, and under-voltage conditions, ensuring safe operation in various environments. Users can feel confident that their equipment is safeguarded, allowing them to focus on delivering powerful audio experiences without worrying about equipment failure.

Samson models often come equipped with comprehensive connectivity options, including XLR, 1/4-inch, and RCA inputs, as well as speaker outputs for various configurations. This flexibility makes it easy to integrate their amplifiers into existing setups, fostering a seamless user experience. Moreover, many models offer variable speed fan cooling and LED indicators that provide real-time status updates, enhancing user control.

The sound quality produced by Samson Power Amplifiers is another major selling point. Designed to deliver clear, transparent audio reproduction, they accommodate both high and low frequencies efficiently, making them suitable for a range of applications—from driving PA systems to amplifying studio monitors.

In summary, Samson Power Amplifiers stand out for their durability, efficiency, protection features, diverse connectivity options, and superior sound quality. Whether for touring bands, DJs, or studio engineers, these amplifiers offer the versatility and reliability required to meet the demands of any audio application, solidifying their status as indispensable tools in the sound reinforcement landscape.

Samson Power Amplifiers manual Power Ampliﬁers

Models: Power Amplifiers