5
1 RIBBON LEvEL – Four-position switch used
to adjust the high frequency response (in 2dB
increments).
2 vOLuME - Controls the amount of output level.
3 XLR INPuT - Balanced, +4dBu line level input is
connected here via standard XLR (microphone)
cable.
Rubicon R8a Layout
Rear Panel Layout - R8a
4 POWER SWITcH – Main power switch.
5 Ac INLET - Connect the supplied IEC power
cable here.
6 1/4-INcH PHONE – Balance TRS (Tip, Ring,
Sleeve) 1/4-inch phone plug used to connect
balanced or unbalanced +4dBu line level signals.
7 RcA – Used to connect signals from unbalanced,
–10dBV devices.