10
Scurve 131 System Configurations
Using Two S curve 231’s for Mains and Monitors
In this example, two S curve 231’s are used for the stereo main and for the 2-channel monitor mix. The mixer’s left and right outputs are connected to the first S curve 231’s inputs for
the main PA speakers. Then, the outputs are connected to the inputs of the power amplifier connected to passive loudspeakers. For the monitor mix, the mixer’s AUX1 output is con-
nected to the second S curve 231’s channel 1 input and AUX2 output is connected to the channel 2 input. Then, the second S curve 231’s channel outputs are connected to the inputs
of the 2-channel power amp. Finally, the power amplifiers outputs are connected to the passive (non-powered) monitor loudspeakers.