10
If the monitor is functioning properly, you will see a white box with a red border and black
text inside as shown in the following illustration:
Figure 5. Monitor self test screen
The three boxes inside the border are red, green and blue. Failure of any of the boxes to
appear indicates a problem with your monitor. This box also appears during normal operation
if the video cable becomes disconnected or damaged.
4Turn off your monitor and reconnect the video cable; then turn on both your computer
and the monitor.
If your monitor screen remains blank after using the previous procedure, check your video
controller and computer system; your monitor is functioning properly.
Getting Help
If your monitor does not display an image, check your cable connections and refer to
“Troubleshooting” on page 21. If you experience difficulties with the quality of the displayed
image, run Auto Adjustment (see page 12) and refer to “Adjusting Your FPD” on page 11 or
“Troubleshooting” on page 21.
Warm-up Time
All FPD monitors need time to become thermally stable the first time you turn them on each
day. Therefore, to achieve more accurate adjustments for parameters, allow the FPD monitor
to warm (be on) for at least 20 minutes before making any screen adjustments.
Check Signal Cable
No Connection
Setting up Your Monitor