Unpacking
Front
Rear
(The configuration at the back of the monitor may vary from product to product.)
1. Power port Connect the DC Adapter for your monitor to the power port on the back
of the monitor.
2. AudioPower - Out
(Option)
3. Signal port Connect the signal cable to the 15-pin, D-sub connector on the back of
your monitor.
4. Pin Press the button on the bottom rear of the stand in order to lock down
the stand.
Note : Always have your monitor faced front side down on a level
surface (not resting on the stand) before locking it down. Pressing the
button while the monitor stand is resting on a flat surface may cause
your monitor to topple or fall and cause personal injury and/or damage
to the unit.
a. Power on/off
Switch
Note:
See Connecting Your Monitor for further information regarding cable conne ctions.
SyncMaster 170N/171N/172N/173N/191N/192N/193N/150N/151N/152N