English 20
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves
energy by switching your monitor into a low-power mode when it has not been used for a
certain period of time. The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”.
Power Saver operates with a VESA DPMS compliant video card installed in your computer.
You use a software utility installed on your computer to set up this feature. See Table 2 below
for details.
Table 2. Power-saving modes
NOTE: This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer’s mouse or press a key on the
keyboard.
*This monitor is EPA E
NERGY
S
TAR
®
compliant and NUTEK compliant when used with a
computer equipped with VESA DPMS
functionality.
For energy conservation, turn your monitor OFF
when you are not using it or when leaving it
unattended for long periods.
NOTE: Maximum power consumption is measured after letting the monitor turned on for 30
minuites that is the time required for the unit to be thermally stable.
State Normal
Operation
Power-Saving Function mode (EPA/NUTEK)
Standby Mode Sleep Mode
Position A1
Deep Sleep Mode
Position A2
Horizontal Sync
Vertical Sync
Video
Active
Active
Active
Inactive
Active
Blanked
Active
Inactive
Blanked
Inactive
Inactive
Blanked
Power
Indicator Green Amber Amber Blinking
(0.5 sec interval)
Amber Blinking
(1 sec. interval)
Power
Consumption
210T
: 90W (Max.)
240T
: 95W (Max.) Less than 5W Less than 5W Less than 5W
Appendix
E240Tbody1.fm Page 20 Saturday, January 13, 2001 9:28 AM