Samsung 25A6, 29A5, 29A6, 29A7, 29K3, 29K5, 29M6, 29U2, 34A7 Storing the Channels Automatically

Storing the Channels Automatically

You can scan the frequency ranges available on your television and in your area and store all the channels found automatically.

The channels are stored in the order in which they appear in the frequency bands. It is possible that the automatically allocated numbers may not correspond to those by which you wish to identify the channels. If this is the case, refer to “Sorting the Stored Channels” on page 19.

1Press the MENU button.

2Press the ▲ or ▼ button to select the “Channel”.

3Press the + or – button to select the “Auto store”.

4Press the + or – button again.

Result: The “Auto store” menu is displayed with the “Area” selected.

5Select your country by pressing the + or – button. The following countries are available: ASIA W/EUROPE - CIS E/EUROPE -

CHINA - HONGKONG U/K - AUSTRALIA - NZ/INDONESIA - SOUTH AFRICA - AMERICA.

6Press the ▲ or ▼ button to select the “Search” and press the + or

– button.

Result: The horizontal bar is displayed, and then channels are stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically.

7When searching and storing is complete, the “Sort” menu is displayed.

To...	Then...
Sort the stored channels	Go to Step 4 of the “Sorting
into the desired numerical order	the Stored Channels”
	procedure on page 19.
Exit the channel store function	Press the MENU button
without sorting the channels	repeatedly until the menus
	disappear.

ENG

Channel

Auto store

Manual store

Name

Add/Erase

Fine tune

Sort

Select		Enter	Exit
		Auto store
	Area	: ASIA W/EUROPE
	Search	: -/+

Select		Adjust	Exit
		Auto store
	Area	: ASIA W/EUROPE
	Search	: -/+

Select Search Exit

P 8	C25	-----
426	MHz	22 %

Exit

	Sort
From	: P 1
To	: P--
Store	: ?

Select Adjust Exit

13