MagicBright™
MENU → ,
→
→
→ ,
→
using the OSD menu.
2) Text
: For documentations or works involving heavy text.
3) Internet
: For working with a mixture of images such as texts
and graphics.
4) Game
: For watching motion pictures such as a game.
5) Sports
: For watching motion pictures such as a Sports.
6) Movie
: For watching motion pictures such as a DVD or Video
CD.
7) Dynamic CR
: Dynamic CR is to automatically detect distribution of
inputted visual signal and adjust to create optimum
contrast.
Custom
You can use the on-screen menus to change the contrast and
brightness according to personal preference.
- Not available in Dynamic CR Mode
MENU → ,
→
→ ,
→
→ ,
→
→ ,
→
1) Contrast
: Adjust the Contrast.
2) Brightness
: Adjust the Brightness.
Contrast
Brightness
If you adjust picture using Custom function, MagicBright™will turn to Custom mode.
Image Lock
Image Lock is used to fine-tune and get the best image by
removing noise that creates unstable images with jitter and
shimmer. If satisfactory results are not obtained using the Fine
adjustment, use the Coarse adjustment and then use Fine again.
- Available in Analog Mode Only
MENU → ,
→
→ ,
→
→ ,
→
→ ,
→
1) Coarse
: Adjust the screen so that all vertical lines (noise) on the
screen are removed. Then, use the horizontal position
adjustment menu to move the screen to the center, as
the screen position may change after the noise has been
removed.
2) Fine
: Removes noise such as horizontal stripes. If the noise
persists even after Fine tuning, repeat it after adjusting
the frequency (clock speed).
3) Sharpness
: Adjust the Sharpness.
- Not available in Dynamic CR Mode
4) H-Position
: Adjusts the screen location horizontally.
5) V-Position
: Adjusts the screen location vertically.
Coarse
Fine
Sharpness
H-Position
V-Position
Auto Adjustment
The values of Fine, Coarse, position are adjusted automatically. By
changing the resolution in the control panel, auto function is
performed.
- Available in Analog Mode Only
MENU → ,
→
→ ,
→
Size
You can switch the Size.
1) Wide