OSD Functions
Characters and icons become highlighted in blue during adjustment for each menu.
PC Control | Video Control | Audio Control | Function Control
1. PC Control
For detailed information on Screen Adjustment in the PC mode, refer to PC mode Screen
Adjustment Animation Clips.
Brightness
Adjust Brightness.
Contrast
Adjust Contrast.
Color Temperature
The tone of color can be changed. The individual color components are also user customizable.
1) Mode 1 : High Temperature.
2) Mode 2 : Middle Temperature.
3) Mode 3 : Low Temperature.
4) User Mode : User customizable.
Image
PC Screen Settings.
1) Image Lock
Image Lock is used to fine tune and get the best image by removing noises that creates unstable
images with jitters and shimmers. If satisfactory results are not obtained using the Fine adjustment,
use the Coarse adjustment and then use Fine again.
2) Image Size
Allows choosing from different image sizes.
Varies depending on the resolution or signal ratio. The Expand 1, Expand 2 and 1:1 functions work
only in PC RGB.
• Coarse : Removes noise such as vertical stripes. Coarse adjustment may move the screen
image area. You may relocate it to the center using the Horizontal Control menu.
• Fine : Removes noise such as horizontal stripes. If the noise persists even after Fine tuning,
repeat it after adjusting the frequency (clock speed).
• Reset : Image lock and position parameters are replaced with the factory default values.
•
Expand 1 :
Performs full screen image expansion. (No change if the resolution is set at
maximum)
•
Expand 2 :
Performs image expansion while maintaining the vertical/horizontal aspect ratio of
the original video resolution. (No change if the resolution is set at maximum)
• 1 : 1 Displays the image as created by the signal source.
(No change if the resolution is set at maximum.)
Position
This adjusts the screen location horizontally and vertically.