51
RECORDING
A / S / M
In this mode you can select the shutter speed or aperture value to your preference.
1. Rotate the mode dial to the A/ S/ M mode and press the
MENU button.
2. Press the DOWN button and the cursor will be shifted to the
main menu.
3. Select [A/S/M] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [A/S/M]
sub menu.
5.
Select the desired sub menu by pressing the UP/DOWN button.
Aperture priority ( A ) :
You can select the aperture value in this mode.
The camera calculates the best shutter speed automatically
to the proper exposure value.
Shutter priority ( S ) :
You can select the shutter speed in this mode.
The camera calculates the best aperture value automatically
to the proper exposure value.
Manual ( M ) :
You can select the shutter speed and the aperture value in this mode.
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear. Take a picture.
INFORMATION
After pressing the shutter button half way down, the values that were changed in the A/S/M
mode will be applied to the picture.
If the aperture value or shutter speed is out of the limit of application, the value that is displayed
on the LCD monitor will show as red. However, you will still be able to take a picture.
BACK:
A/S/M SETUP MyCAM
SET:OK
SIZE
QUALITY
A/S/M
METERING
A
S
M
EXIT:MENU
A/S/M SETUP MyCAM
PAGE:
SIZE
QUALITY
A/S/M
METERING
2272x1704
FINE
A
MULTI
It warns that : To be the properly exposed, the aperture value
should be smaller than F 2.8. The minimum aperture
value that you can select is F 2.8.