21
English
Screen is blank and
power indicator light is
steady amber or blinks
every 0.5 or 1 seconds
nThe monitor is using its power
management system.
nMove the computer’s mouse or
press a key on the keyboard
PowerSaver,
page 19.
Image is not stable and
may appear to vibrate
nCheck that the display resolution
and frequency from your PC or video
board is an available mode for your
monitor. On your computer check:
Control Panel, Display, Settings
Display Mode,
page 17.
Display Modes,
page 26.
nIf the setting is not correct, use your
computer utility program to change
the display settings.
Installing the Video
Driver, page 7.
NOTE: Your monitor supports multiscan display functions
within the following frequency domain:
nHorizontal frequency:
nVertical frequency:
nMaximum refresh rate:
30 kHz – 61 kHz
50 Hz – 75 Hz
1024 x 768 @ 75 Hz
Image is not centered
on the screen.
nAdjust the horizontal and vertical
position.
H-Position, page 14.
V-Position, page 14.
You need the monitor
driver software
nDownload the driver from the internet
at:
http://www.samsungelectronics.com
Table 5. Troubleshooting problems – Image (
Continued
)
What you see... Suggested Action Reference
Appendix
E Page 21 Friday, August 11, 2000 2:44 PM