19
English
03 Basic Features
Multi-Track Sound (MTS)
t
(analog channels only)
■Mono: Choose for channels that are
broadcasting in mono or if you are having
difficulty receiving a stereo signal.
■Stereo: Choose for channels that are
broadcasting in stereo.
MTS
■SAP: Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
✎
Depending on the particula r program being broadcast,
you can listen to Mono, Stereo or SAP.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
■Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎
When Speaker Select is set to Ex ternal Speaker, the
volume and MUTE buttons will not ope rate and the
sound settings will be limited.
✎
When Speaker Select is set to Ex ternal Speaker
x
TV Speaker: Off , Exte rnal Speaker: On
✎
When Speaker Select is set to TV S peaker
x
TV Speaker: On , Extern al Speaker: On
✎
If there is no video signal, both speake rs will be mute.
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
■Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
■Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Setup Menu

¦Setting the Time

O
MENU
m
→ Setup → Time → ENTER
E
Time
■Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the INFO button.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
– Auto: Set the current time automatically using the
time from a digital channel.
✎
The antenna must be connected in ord er to set
the time automatically.
– Manual: Set the current time manually.
✎
Depending on the broadcast statio n and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and
am/pm manually.
✎
Available only when Clock Mode is s et to
Manual.
✎
You can set the Month, Day, Year, Hour and
Minute directly by pressing the numb er buttons
on the remote control.
DST (Daylight Saving Time) (Off / On): Switches the
Daylight Saving Time function on or off.
✎
This function is only available w hen the Clock
Mode is set to Auto.
Time Zone: Select your time zone.
✎
This function is only available w hen the Clock
Mode is set to Auto.

¦Using the Sleep Timer

O
MENU
m
→ Setup → Time → Sleep Timer →
ENTER
E
■Sleep Timer : Automatically shuts off the
TV after a preset period of time (30, 60,
90, 120, 150 and 180 minutes).
✎
To cancel the Sleep Timer, select
Off.

SLEEP

[UC6300-Mexico]BN68-03165C-00L02.indb 19 2010-06-22 오전 11:29:21