Chapter Three: Adjusting Your Monitor
COLOR TEMP.
Follow these steps to change the color temperature set- ting. Color Temperature is a measure of the “warmth” of the image colors.
1 Push this button once to access the color temperature function.
2 Use the V and A buttons to select between the 9300K color and the 6500K color.
Use this button to return the settings to their original factory settings.
Push and hold in the recall button for several sec- onds, or until the power indicator LED changes from orange to green.
After pushing this button, a green LED indicates that the factory settings for the current video signal timing have been recalled. The OSD shows the progress of the recall function.
Note : This operation resets all of the data in the user memory area for the current timing signal.
DegaussThe Degauss feature will remove any color impurity caused by magnetic fields. Do not use the Degauss feature more than once within a
Push the button once to activate the degaussing cir- cuit. The monitor may buzz momentarily, the image colors may change and the image will jiggle for a few seconds. These effects are normal.
The degaussing circuit automatically turns itself off after a few seconds.
WARNING : Don’t push and hold the degauss button for longer than 5 seconds. If you do, this operation resets all of the data in the user memory area. If this occurs, you must remake your user adjustments.
9