Signal Cable
15pin to 15pin D-sub cable, Detachable, 1.8 m
DVI-D to DVI-D connector, Detachable, 2.0 m (Option)
Signal Connectors
15pin 3-row D-Sub connector, 24pin 3-row DVI-D connector
Power Consumption
Less than 34 W
Dimensions (W x D x H) / Weight
380.0 x 57.3 x 325.0 mm / 14.9 x 2.2 x 12.8 inch (Without Stand) / 3.75 kg
380.0 x 202.2 x 384.8 mm / 15.0 x 7.9 x 15.1 inch (With Stand) / 5.5 kg
VESA Mounting Interface
75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.)
Environmental considerations
Operating Temperature : 50 °F ~ 104 °F (10 °C ~ 40 °C)
Humidity : 10 % ~ 80 %, non-condensing
Storage Temperature : -4 °F ~113 °F (-20 °C ~ 45 °C)
Humidity : 5 % ~ 95 %, non-condensing
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and
computer systems will provide the best operating conditions and monitor settings. In most cases,
monitor installation will proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1 ppm
(one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color
seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and
you can use it without uneasiness.
For example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160.
Design and specifications are subject to change without prior notice.
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor into a low-power mode when it has not been used for a certain amount of
time. The monitor automatically returns to normal operation when you press a key on the keyboard.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended
for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed
in your computer. Use a software utility installed on your computer to set up this feature.
State Normal Operation Power saving mode Power off
(Power button)
EPA/ENERGY 2000
Power Indicator Blue Blue, Blinking Black