dark shadows.
White color is poor.
Power Indicator blinks green. zThe monitor is currently saving the changes made in settings
to the OSD memory.
Screen is blank and power
indicator light is steady green or
blinks every 0.5 or 1 seconds
zThe monitor is using its power management system.
zpress a key on the keyboard
The screen is blank and is
blinking.
zIf you see the "TEST GOOD" message on the screen when
you press the MENU button, check the cable connection
between the monitor and the computer to ensure that the
connector is properly connected.
3. Problems related to Audio
Problems related to audio signals and their solutions are listed below.
Problems Solutions
No sound zEnsure that the audio ca ble is firmly connected to both the
audio-in port on your monitor and the audio-out port on your
sound card.
(Refer to the Connecting the Monitor)
zCheck the volume level.
(Refer to the Volume)
The sound level is too low. zCheck the volume level.
(Refer to the Volume)
zIf the volume is still too low after turning the control to its
maximum, check the volume control on the computer sound
card or software program.
Sound is too high pitched or too
low pitched
zAdjust the Treble and Bass to appropriate level.
4. Problems related to Remote Control
Problems related to the remote control and their solutions are listed.
Problems Items to check
The remote control buttons do
not respond.
zCheck the battery polarities (+/-).
zCheck if the batteries have been exhausted.
zCheck if the power is on.
zCheck if the power cord is securely connected.
zCheck if a special fluorescent or neon lamp is on in the
vicinity.
Q & A
Question Answer
How can I change the frequency? The frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version of the
driver used. (Refer to the computer or the video card manual for
details.)
How can I adjust the resolution? zWindows XP :
Set the resolution in the Control Panel→Appearance and
Themes→Display→Settings.
zWindows ME/2000 :
Set the resolution in the Control Panel→Display→Settings.