Samsung 940MW manual Connecting to a Computer, Connecting to a Macintosh

Connecting the monitor

1.Connecting to a Computer

1.Connect the power cord for your monitor to the POWER on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

2-1.Using the D-sub (Analog) connector on the video card.

Connect the signal cable to the RGB port on the back of your monitor.

2-2.Using the DVI (Digital) connector on the video card.

Connect the DVI cable to the DVI(HDCP) port on the back of your monitor.

3.Connect the (DVI/PC IN) AUDIO port on the rear side of the monitor to the sound card of the PC.

4.Turn on both your computer and the monitor.

2.Connecting to a Macintosh