Menu Description
(Available in Analog mode only)
Note
When TV signal is input in AV mode ,select “Screen Fit “to adjust
vertical position in 0-6 levels.
Image Size Note
Supplied for the wide models only such as 16:9 or 16:10.
You can change the size of the screen displayed on your monitor.
PC signals
•Auto - The screen is displayed in accordance with the screen aspect
ratio of the input signals.
•Wide - A full screen is displayed regardless of the screen aspect
ratio of the input signals.
Note
•Signals not available in the standard mode table are not supported.
•If the wide screen which is the optimal resolution for the monitor
is set on your PC, this function is not performed.
AV signals
•4 : 3 - Sets the picture to 4:3 normal mode.
•16 : 9- Sets the picture to 16:9 wide mode.
•Screen Fit- Use the function to see the full image without any cutoff
when DVI (480p/576p/720p/1080i/1080p) signals are input.
Note
It can only be selected if an external input is connected to the DVI
terminal and the 'PC/AV Mode' is set to 'AV'.
•4 : 3 - Sets the picture to 4:3 normal mode.
•Wide-Sets the picture to 16:10 wide mode.
•Screen Fit- Use the function to see the full image without any cutoff
when DVI (480p/576p/720p/1080i/1080p) signals are input.
Note
• It can only be selected if an external input is connected to the DVI
terminal and the 'PC/AV Mode' is set to 'AV'.
•When the panel is of 16:10,the screen size options include
“4:3”,”wide “,”Screen fit“.
Menu H-Position You can change the horizontal position where the OSD menu appears
on your monitor.
Adjusting the Monitor
43