115
Starting PC mode
Connecting the camera to a PC
1. Slide the power switch to turn the camera power on.
2. Use the supplied USB cable to connect the camera to
the computer as shown below.
3. Turn on the computer to connect the camera to the
printer.
4. A window for selecting an external device will display on
the LCD monitor.
5. Select [COMPUTER] menu by pressing the Up/Down
button and press the OK button.
If you selected [PRINTER] in Step 5, when you connect the camera to your computer, the
[USB ERROR!] message will display and the connection will not be established. In this case,
disconnect the USB cable, and then follow the procedure from Step 2 and onward.
If you connect the USB cable to a USB port on your PC and then turn on the power, the
camera will automatically switch to "computer connection mode".
In this mode, you can download stored images to your PC through the USB cable.
USB CONNECTION
COMPUTER
PRINTER
CONFIRM:OK