❾➓45❾➔
Metering❾✃If you cannot obtain suitable exposure conditions, you can change the metering method to
take brighter pictures.
MULTI( ) : Exposure will be calculated based on an
average of the available light in the image
area. However, the calculation will be
biased towards the centre of the image
area. This is suitable for general use.
SPOT( ) : Only the rectangular area in the center of
the LCD monitor will be metered for light.
This is suitable when the subject in the
center is exposed correctly, regardless of the back lighting.
❾➴The default metering mode is Multi pattern metering.
❾➴If the subject is not the centre of the focus area, do not use the spot metering as this may
result in an exposure error. In this circumstance, rather use exposure compensation.
INFORMATION
Continuous shot
❾✃Select the number of pictures in continuous shooting.
- [SINGLE] : Take one picture only
- [2, 4, 8 SHOTS] : Take the set number of pictures with
one push of the shutter. Continuous
shooting mode is cleared after one
shooting.
- [AEB] : Take three pictures in a series in
different exposures: short exposure
(-0.5EV), standard exposure (0.0EV)
and over exposure (+0.5EV). Use the
mode if it is hard to decide exposure of
the object.
2048
SHOOTING
SINGLE
2 SHOTS
4 SHOTS
8 SHOTS
NOR
[ PROGRAM mode ]
2048
METERING
MULTI
SPOT
3072 NOR