Connecting drain hose

1.Slightly hit the hole, for drain hose, with your hands or hammer.

2.Insulate the drain hose with drain insulation tube and fix it with tape.

3.Make the drain hose to direct downward to establish natural draining. -- Make sure to check for proper drainage after connection

• Fix the drain hose tightly to prevent any water leakage.

CAUTION • Do not use the extended drain hose.

-- Since water may leak from the connection part, make sure that you do not extend the drain hose. However, if extension is unavoidable due to its short length, use silicone sealant to securely seal the connection to prevent leakage. (Do not use the insulation tape.)

Drain hose

Duct drainage [Polypropylene(PP)]

Insulation (foamed

polyethylene)

Connection

drain hose

Connect the drain hose through the upper hole for drain hose.

Upper hole for a drain hose Drain hose

mm410 Piping

Hole for piping connection

• Connection with wire-concealed piping

Upper hole for

 

 

 

Incorrect installation

a drain hose

 

Drain hose

 

(U-TRAP)

Piping

Hole for piping connection

• Make sure the U-TRAP does not occur. Water may overflow and cause property damage.

CAUTION

44

사우디,인도,나이지리아향 FAC MEMORY 냉방_IBIM_EN_03794A(7).indd 44

2014-03-12 오전 10:30:01

Page 45
Image 45
Samsung AF28FVSDADFNMG, AF28FVZDAWKNMG manual Connecting drain hose, Fix the drain hose tightly to prevent any water leakage