Samsung and DS-5007S Button LEDs

12

© Samsung Telecoms (UK) Ltd. .

Button LEDs

The [Transfer] button, [Hold] button, and [Speaker] button have LEDs that turn on or

off according to the phone status.

For incoming external calls or intercom calls ringing at your phone the trunk button LED or Call

button LED will flash green. The trunk button LED will flash red on other digital phones with the

same trunk button. While holding a call, the green LED of the trunk line will flash.

The following table summarises the status of LEDs.

Function Button LED Status

Trunk line or functions are in use LED is steady green or red.

New call is ringing LED is a fast flashing green.

A call is on hold LED is a slow flashing green or red.

A call is recalling to the digital phone LED is a slow flashing amber.

[Transfer] button [Hold] button [Speaker] button

Contents

Main SAMSUNG OfficeServ DS-5014S Enterprise IP Solutions DS-5007S Page EU Declaration ofConformity(RTTE) Samsung Electronics Co., Ltd. 259 Gongdan-Dong, Gumi-City Kyungbuk, Korea, 730-030 Digital Keyphone System "iDCS500 / OfficeServ500" ABOUT THIS GUIDE SAFETY PRECAUTIONS CONTENTS INTRODUCTION PREPARATION THINGS YOU SHOULD KNOW USING THE FEATURES PREPARATION Main Features Page Front View of the Phone DS-5038S DS-5014S / DS-5007S Connecting Lines to the Phone THINGS YOU SHOULD KNOW Volume Adjustment Adjusting Handset/Speaker Volume Adjusting Ring Volume Entering Characters A Button Page Procedure Procedures for entering characters are described below. Button LEDs USING THE FEATURES Making a Call Calling an Extension Number Calling an Outside number Using a Speakerphone New Call Redial Save Number with Redial Answering a Call Using a Handset Using the Speakerphone Call Pickup Features Used During a Call Hold an Intercom Call Hold an Outside Call Mute Transferring a Call Conference Calls ANNEX Troubleshooting Page Product Specifications