Operating to the Long Distance
The Long function is used to cool your room as far as possible. In the Long function, the up/down orientation of air flow and fan speed are selected automatically.
1 If necessary, press the 
(On/Off) button.
Result: | ◆ The operation indicator on the indoor unit lights up. |
| ◆ The air conditioner starts up in the mode selected |
| when the unit was last used. |
| ◆ The indoor unit beeps. |
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Switched on
◆Stopped
lt will start up normally after three minutes.
2 Press the 
button twice.
Result: ◆ The air conditioner cools the room as far as possible. ◆ The fan settings are adjusted automatically.
◆ If you press the 
button in the DRY or the FAN mode that is changed with the Auto mode automatically.
Note You cannot select Turbo and Long function simultaneously.
3To adjust the temperature, press the 
buttons one or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result: Each time you press the 
buttons: - The temperature is adjusted by 1°C. - The indoor unit beeps.
4 If you wish to stop the Long function, press the 
button again.
Result: | The air conditioner is reset automatically to the previous |
| mode, temperature and fan settings. |
5To control the direction of the air flow horizontally, refer to page 15.
