appendix

TROUBLESHOOTING

Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses.

PROBLEM

SOLUTION

 

 

The air conditioner does

Because of the protective mechanism, the appliance does not start

not operate immediately

operating immediately to keep the unit from overloading.

after it has been

The air conditioner will start in 3 minutes.

restarted.

 

 

 

The air conditioner does

Check that the power plug is properly connected. Insert the power plug

not work at all.

into the wall socket correctly.

 

Check if the circuit breaker is switched off.

 

Check if there is a power failure.

 

Check your fuse. Make sure it is not blown out.

 

 

The temperature does

Check if you selected Fan mode.

not change.

Press the Mode button on the remote control to select another mode.

 

 

The cool(warm) air does

Check if the set temperature is higher(lower) than the current temperature.

not come out of the air

Press the Temp or button on the remote control to change the set

conditioner.

temperature. Press the Temp or button to increase or decrease the

 

temperature.

 

Check if the air filter is blocked by dirt. Clean the Air filter every two weeks.

 

Check if the air conditioner has just been turned on. If so, wait 3 minutes.

 

 

The fan speed does not

Check if you selected Auto or Dry mode.

change.

The air conditioner automatically adjusts the fan speed to Auto in Auto/Dry

 

mode.

 

 

Timer function does not

Check if you press the Set/Cancel button on the remote control after you

set.

have set the time.

 

 

Odors permeate in the

Check if the appliance is running in a smoky area or if there is a smell

room during operation.

entering from outside. Operate the air conditioner in Fan mode or open

 

the windows to air out the room.

 

 

The air conditioner

A bubbling sound may be heard when the refrigerant is circulating through

makes a bubbling sound.

the compressor. Let the air conditioner operate in a selected mode.

 

 

Water is dripping from

Check if the air conditioner has been cooling for an extended period of

the air flow blades.

time with the air flow blades pointed downwards. Condensation may

 

generate due to the difference in temperature.

 

 

Remote control is not

Check if your batteries are depleted.

working.

Make sure batteries are correctly installed.

 

Make sure nothing is blocking your remote control sensor.

 

Check that there are strong lighting apparatus near the air conditioner.

 

Strong light which comes from fluorescent bulbs or neon signs may

 

interrupt the electric waves.

 

 

When the electricity

The air conditioner has power failure memory function. After a sudden

comes again after power

power failure, If the electricity comes again, the air conditioner

failure, the air conditioner

automatically revert to the original operation mode.

automatically starts.

 

 

 

32_ appendix

UMG_IB_E_DB98-32249A.indd 32

2010-12-30 14:00:56

Page 31
Image 31
Samsung AQ36UGAXUMG, AQ36UGANUMG, AQ30UGANUMG, AQ30UGAXUMG manual Appendix, Troubleshooting